Acetal Copolímero FM270 Formosa Plastics

Nombre del producto: OTR – MFI27 – FORMOSA – ACETAL FM270
Categoría: Otros
Información del manual del producto: FORMOCON® FM270
Acetal (POM) Copolymer
Formosa Plastics Corporation
www.ulprospector.com
Technical Data
Product Description
Characteristics: High flow.
Application: Zipper, electronic parts, press-in fasteners, gears, and electronic parts. Automotive parts, Household appliances, Other small
mechanical parts
Also known as FORMOSACON
General
Material Status
• Commercial: Active
Literature 1
• Technical Datasheet – Data Table (English)
UL Yellow Card 2
• E173318-226133
Search for UL Yellow Card
• Formosa Plastics Corporation
Availability
• Asia Pacific
• Europe
• North America
Features
• High Flow
Uses
• Electrical/Electronic
Applications
• Fasteners
Forms
• Pellets
Physical
Nominal Value Unit
Test Method
Density / Specific Gravity
1.41 g/cm³
ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
27 g/10 min
ASTM D1238
Molding Shrinkage – Flow (3.00 mm)
1.8 to 2.2 %
ASTM D955
Water Absorption (Equilibrium, 23°C, 69%RH)
0.22 %
ASTM D570
Mechanical
Nominal Value Unit
Test Method
Tensile Strength (Yield)
60.8 MPa
ASTM D638
Tensile Elongation (Break)
45 %
ASTM D638
Flexural Modulus
2550 MPa
ASTM D790
Flexural Strength
93.2 MPa
ASTM D790
Compressive Strength
ASTM D695
1% Strain
31.4 MPa
10% Strain
108 MPa
Impact
Nominal Value Unit
Test Method
Notched Izod Impact (23°C)
53 J/m
ASTM D256
Hardness
Nominal Value Unit
Test Method
Rockwell Hardness (M-Scale)
80
ASTM D785
Thermal
Nominal Value Unit
Test Method
Deflection Temperature Under Load
ASTM D648
0.45 MPa, Unannealed
158 °C
1.8 MPa, Unannealed
110 °C
Vicat Softening Temperature
162 °C
ASTM D1525
Melting Temperature
165 °C
DSC
CLTE – Flow
8.5E-5 cm/cm/°C
ASTM D696
Electrical
Nominal Value Unit
Test Method
Surface Resistivity 4
1.0E+16 ohms
ASTM D257
Volume Resistivity 4 (23°C)
1.0E+14 ohms·cm
ASTM D257
Dielectric Strength (2.00 mm)
24 kV/mm
ASTM D149
Dielectric Constant
IEC 60250
50 Hz
3.80
1 kHz
3.80
1 MHz
3.80
1 of 3
Form No. TDS-123826-en
UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved.
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Document Created: Tuesday, July 31, 2018
Added to Prospector: December 2008
Last Updated: 11/13/2013
FORMOCON® FM270
Acetal (POM) Copolymer
Formosa Plastics Corporation
www.ulprospector.com
Flammability
Nominal Value Unit
Test Method
Flame Rating
HB
UL 94
Notes
1 These links provide you with access to supplier literature. We work hard to keep them up to date; however you may find the most current literature
from the supplier.
2 A UL Yellow Card contains UL-verified flammability and electrical characteristics. UL Prospector continually works to link Yellow Cards to
individual plastic materials in Prospector, however this list may not include all of the appropriate links. It is important that you verify the association
between these Yellow Cards and the plastic material found in Prospector. For a complete listing of Yellow Cards, visit the UL Yellow Card Search.
3 Typical properties: these are not to be construed as specifications.
4 50%RH
2 of 3
Form No. TDS-123826-en
UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved.
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Document Created: Tuesday, July 31, 2018
Added to Prospector: December 2008
Last Updated: 11/13/2013
FORMOCON® FM270
Acetal (POM) Copolymer
Formosa Plastics Corporation
www.ulprospector.com
Where to Buy
Supplier
Formosa Plastics Corporation
Taipei, Taiwan
Telephone: +886-2-2712-2211
Web: http://www.fpc.com.tw/
Distributor
A. Westensee und Partner Rohstoff GmbH
Telephone: +49-4171-8812-0
Web: http://www.awp-rohstoffe.de/
Availability: Germany
Click Plastics AG
Click Plastics AG is a Pan European distribution company. Contact Click Plastics for availability of individual products by country.
Telephone: +49-6251-770-690-0
Web: http://www.clickplastics.com
Availability: Germany
POLYMIX
Telephone: +33-3-8920-1380
Web: http://www.polymix.eu/
Availability: Croatia, Portugal, Romania, Serbia, Slovenia, Spain
3 of 3
Form No. TDS-123826-en
UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved.
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Document Created: Tuesday, July 31, 2018
Added to Prospector: December 2008
Last Updated: 11/13/2013