Formolene HL5010 PE – HDPE – MFI10 Formosa Plastics

Nombre del producto: PE – HDPE – MFI10 – FORMOSA – FORMOLENE HL5010
Categoría: Polietileno
Información del manual del producto: 10/15

Formolene® HL5010

Extra High Molecular Weight Hexene Copolymer

Formolene® HL5010 has good melt strength, excellent stress crack resistance, good rigidity, and
excellent impact strength even at low temperatures. These properties make Formolene® HL5010 an
excellent resin for large part blow molding applications.

Formolene® HL5010 meets the requirements of the U.S. Food and Drug Administration as specified in
21 CFR 177.1520 for food packaging, covering safe use of polyolefin articles intended for direct food
contact.

Suggested Applications:
Blow Molded…
Extruded…
55-Gallon Shipping Containers
Pallets
Gasoline Tanks
Large Formed Parts
Agricultural Chemical Tanks
Corrugated Pipes (Certified to AASHTO M294)

Conduit Pipes (Meets ASTM F2160)

Nominal Physical Properties:
PROPERTY*
ASTM
TEST
METHOD

ENGLISH
Unit Value

SI
Unit Value
Density
D1505
g/cc
0.949
g/cc
0.949
HLMI, Condition F, 190C/21.60 kg
D1238
g/10 min.
10.0
g/10 min.
10.0
Environmental Stress Crack
Resistance (ESCR)

Condition B, (100% Igepal), F50

D1693

h

>600

h

>600
Tensile Yield Strength,

2” (50 mm) per min.
D638
Type IV
psi.
3600
MPa
25
Ultimate Elongation

2” (50 mm) per min.
D638
Type IV
%
>600
%
>600
Brittleness Temperature
D746
F
<-131 F C <-91 Flexural Modulus D790 psi. 170,000 MPa 1172 * Physical properties reported herein were determined on compression molded specimens prepared in accordance with Procedure C of ASTM D1928. The nominal properties reported herein are typical of the product but do not reflect normal testing variance and therefore should not be used for specification purposes. Published 6/01/2005, Revised 1/04/2016