Polietileno Formolene HP4000 – Formosa Plastics

Nombre del producto: PE – HDPE – MFI0.14 – FORMOSA – FORMOLENE HP4000
Categoría: Polietileno
Información del manual del producto: 10/15
Formolene® HP4000

High Density Polyethylene for Pipe Non-Pressure Pipe Extrusion Applications

Formolene® HP4000 is a high performance copolymer that is designed for the most demanding requirements of non-
pressure pipe applications. It has good long-term hoop strength performance, very high melt strength, and outstanding
toughness even at low temperatures.

Formolene® HP4000 meets all requirements of ASTM D4976 – PE 235

Formolene® HP4000 meets the requirements of ASTM F 2160 and UL651A for use in solid wall HDPE conduit pipe.

Suggested Applications:
Telecommunications Conduit
Non-Pressure Pipe Applications

Nominal Physical Properties:

PROPERTY* (Natural Resin)
ASTM
TEST
METHOD

ENGLISH
Unit Value

SI
Unit Value
Density
D1505
g/cc
0.944
g/cc
0.944
Melt Index,
Condition E, 190°C/2.16 kg (MI)

D1238

g/10 min.

0.14

g/10 min.

0.14
Environmental Stress Crack Resistance
(ESCR)

Condition A, B, C

(100% Igepal), F50

D1693

h

>1000

h

>1000
Tensile Yield Strength,

@ Yield

@ Break

2” (50 mm) per min.
D638
Type IV

psi.
psi.

3200
5000

MPa
MPa

22
34

Ultimate Elongation,

2” (50 mm) per min.
D638
Type IV
%
>500
%
>500
Flexural Modulus

D3350
D790
psi.
psi.
110,000
140,000
MPa
MPa
760
960
Brittleness Temperature
D746
°F
<-130 °C <-90 * Physical properties reported herein were determined on compression molded specimens prepared in accordance with Procedure C of ASTM D1928 The nominal properties reported herein are typical of the product but do not reflect normal testing variance and therefore should not be used for specification purposes. Published 06/01/06, Revised 09/18