EVA – MFI2 – AMCO Polymers

Nombre del producto: EVA – MFI2 – AMCO – PRIMATOP EVA 020-18
Categoría: Etileno Acetato de Vinilo
Información del manual del producto: PRIMATOP® EVA 020-18
Amco Polymers – Ethylene Vinyl Acetate Copolymer
Monday, March 11, 2024
General Information
General
Material Status
• Commercial: Active
Availability
• North America
Features
• Copolymer
• Food Contact Acceptable
• Good Flexibility
Uses
• Compounding
• Profiles
Agency Ratings
• FDA 21 CFR 177.1520
Processing Method
• Compounding
• Injection Molding
• Profile Extrusion
ASTM & ISO Properties 1
Physical
Nominal Value Unit
Test Method
Density
0.934 g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
2.0 g/10 min
ASTM D1238
Vinyl Acetate Content
18.0 wt%

Hardness
Nominal Value Unit
Durometer Hardness (Shore A, 15 sec)
76

Thermal
Nominal Value Unit
Vicat Softening Point
60 °C

Notes
1 Typical properties: these are not to be construed as specifications.
Bamberger Amco Polymers’ Disclaimer Statement: Bamberger Amco Polymers (“BAP”) is not the manufacturer of this Product, and BAP has not tested, designed, altered, or modified the Product in
any way. BAP does not independently test the Product or verify the information provided in this document. The information provided in this document was provided by the manufacturer, and BAP disclaims
any responsibility for a User’s reliance on, and the results of use of, this information. The information included herein is not a BAP warranty of any kind, nor is it intended to be. Users must make their own
representative tests to determine the safety and suitability of the Product for its intended use, and Users assume all risks of Product use, whether the Product is used alone or in combination with other
materials or as a component part of another product. BAP assumes no obligation or liability for any advice furnished or results obtained with respect to the Product, nor for use of the Product in
infringement of any patent. AS SUCH, BAP DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR ANY
PARTICULAR PURPOSE OR USE. The foregoing limitation of remedy and exclusion of liability is reflected in, and is part of, the consideration for the price charged for the Product.
Page: 1 of 1