Formolene® FL2202C LDPE Formosa Plastics

Nombre del producto: PE – LDPE – MFI2 – FORMOSA – FORMOLENE FL2202C
Categoría: Polietileno
Información del manual del producto: 02/20
Formolene® FL2202C
Liner LDPE Resin with no Slip or Antiblock
Formolene® FL2202C is a low density polyethylene offering good balance of optical and mechanical
properties. Formolene® FL2202C is formulated without slip and antiblock for use in film applications
offering excellent extrusion processing and film optical properties.

Formolene® FL2202C meets all requirements of the U.S. Food and Drug Administration as specified in 21
CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

Suggested Applications:
Blend Partner Freezer Film Mail Bags
Food Packaging Lamination Film Shoppers
Foams Compounding Textile Packaging
Liners Form Fill and Seal Packaging
Nominal Physical Properties:
PROPERTY
TEST
METHOD
UNIT
VALUE
Density
D1505
g/cc
0.923
Melt Index, Condition E, 190C°/2.16 kg
D1238
g/10 min
2.0
Dart Impact
D1709
g
80
Elmendorf Tear Strength
D1922
g
150/120*
Tensile Strength at Yield
D882
psi
1600/1600*
Tensile Strength at Break
D882
psi
3600/3200*
Elongation at Break
D882
%
330/550*
Secant Modulus @ 1%
D882
psi
30000/33000*
Gloss (45°)
D2457

63
Haze
D1003
%
6.1

* MD / TD

Note: Film properties based on 1.5 mil (38.1 micron) thick film produced on a 2.5 inch (63.5 mm) blown film line
with a 2.5:1 blow-up ratio, a melt temperature of 340-360°F (171-182°C), a 30 mil (0.76 mm) die gap at a rate of 8
lbs/hr/in die circumference (1.43 kg/hr/cm). Actual film properties may vary based on extrusion equipment, operating
conditions and additive package. Film properties are not intended to be used as specifications.

Published 12/1/2020