Polipropileno Copolímero Random 3355E Formosa

Nombre del producto: PP – RANDOM – MFI55 – FORMOSA – 3355E
Categoría: Polipropileno
Información del manual del producto: 10/15
Formolene® 3355E

Random Copolymer for Clear Storage Containers and Food and Beverage Containers

Formolene® 3355E is a high melt flow random copolymer with fast cycle time and good mold and denesting release. It is
designed for injection molding including thin wall applications.

The use of an advanced clarifier with low yellowness index and haze – makes it an excellent choice for ‘see-through’
housewares and rigid packaging. Use of this clarifier allows processers to run at lower temperatures – resulting in the
potential for cycle time reductions and energy savings.

Formolene® 3355E meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520,
covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional
information on approved conditions of use for food contact applications, please refer to the “Products” section on our
website (http://www.fpcusa.com/ourproducts.html).

This material is free of animal-derived content.

Typical Properties of this Commercial Grade

Typical Values
Property
Test Method
English
SI
Melt Flow Rate, I2 @ 230°C
ASTM D1238
55
g/10min
55
g/10min
Density
ASTM D1505
0.9
g/cm3
0.9
g/cm3
Tensile Strength at Yield (50 mm/min)
ASTM D638
4,200
psi
29
MPa
Elongation at Yield (50 mm/min)
ASTM D638
14
%
14
%
Flexural Modulus (1.3 mm/min), 1% Secant
ASTM D790
150,000
psi
1034
MPa
Notched Izod Impact Strength @ 73°F
ASTM D256A
1.0
ft-lb/in
53
J/m
Gardner Impact @73°F
ASTM D5420
180
in-lb
20
J
Heat Deflection Temperature @ 66psi
ASTM D648
178
°F
81
°C
Plaque haze (1 mm), %
FPC Method
10
%
10
%
Note: Specimens were injection molded according to the conditions specified in ASTM D4101. Data for representative purposes
only; not to be construed as product specification. Published 01/13, Revised 3/18