Polietileno NA321013 LyondellBasell

Nombre del producto: PE – LDPE – MFI2 – LYONDELLBASELL – NA321013
Categoría: Polietileno
Información del manual del producto: Petrothene NA321013
Technical Data Sheet
Regulatory Status
For regulatory compliance information, see Petrothene NA321013 Product Stewardship Bulletin (PSB) and
Safety Data Sheet (SDS).
Status
Commercial: Active
Availability
North America
Application
Clarity Film
Market
Flexible Packaging
Processing Method
Blown Film; Cast Film
Low Density Polyethylene
Typical Properties
Nominal
Value
English
Units
Nominal
Value
SI
Units
Test Method
Physical
Melt Flow Rate, (190 °C/2.16 kg)
2.0
g/10 min
2.0
g/10 min
ASTM D1238
Base Resin Density, (23 °C)
0.923
g/cm³
0.923
g/cm³
ASTM D1505
Film
Dart Drop Impact Strength, F50
77
g
77
g
ASTM D1709
Tensile Strength at Break
MD
3190
psi
22.0
MPa
ASTM D882
TD
2390
psi
16.5
MPa
ASTM D882
Tensile Strength at Yield
MD
1625
psi
11.2
MPa
ASTM D882
TD
1710
psi
11.8
MPa
ASTM D882
Tensile Elongation at Break
MD
325
%
325
%
ASTM D882
TD
605
%
605
%
ASTM D882
1% Secant Modulus
MD
32600
psi
225
MPa
ASTM D882
TD
40000
psi
276
MPa
ASTM D882
Elmendorf Tear Strength
MD
542
g
542
g
ASTM D1922
TD
456
g
456
g
ASTM D1922
Optical
Haze
4.5
%
4.5
%
ASTM D1003
Gloss
75
75

ASTM D2457
Additive
Slip
None
None
LYB Method
Product Description
Petrothene NA321 is a series of homopolymer resins that combine premium clarity with strength and stiffness. In
addition, NA321 exhibits good impact strength on both flat and creased film. NA321 is selected by customers for
textile packaging, light produce, bread bags and other thin packaging films enhanced by clarity and sparkle.
Page 1 of 2
LyondellBasell
Technical Data Sheet
Date: 2/25/2019
Petrothene NA321013
Recipient Tracking #:
Request #: 1760748
Notes
Data obtained from 2.0 mil film produced on a 2″ extruder with a 4″ die, 410°F melt temperature, 3:1 BUR,0.060″
die gap at 50 lbs/hr.
These are typical property values not to be construed as specification limits.
Processing Techniques
Specific recommendations for resin type and processing conditions can only be made when the end use,
required properties and fabrication equipment are known.
Company Information
For further information regarding the LyondellBasell company, please visit http://www.lyb.com/.
© LyondellBasell Industries Holdings, B.V. 2018
Disclaimer
Information in this document is accurate to the best of our knowledge at the date of publication. The document
is designed to provide users general information for safe handling, use, processing, storage, transportation,
disposal and release and does not constitute any warranty or quality specification, either express or implied,
including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether
the product is suitable for their use and can be used safely and legally.
In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or
restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell
representative.
Trademarks
The Trademark referenced within the product name is owned or used by the LyondellBasell family of
companies.
Product
Haze(%)
Gloss( )
Slip(ppm)
Antiblock
(ppm)
NA321013
4.5
75
None
None
NA321210
5.0
70
750
1000
Antiblock
None
None
LYB Method
Page 2 of 2
LyondellBasell
Technical Data Sheet
Date: 2/25/2019
Petrothene NA321013
Recipient Tracking #:
Request #: 1760748