EVA MFI2.1 LyondellBasell

Nombre del producto: EVA – MFI2.1 – LYONDELLBASELL – UE624000
Categoría: Etileno Acetato de Vinilo
Información del manual del producto: Ultrathene UE624000
Technical Data Sheet
Regulatory Status
For regulatory compliance information, see Ultrathene UE624000 Product Stewardship Bulletin (PSB) and
Safety Data Sheet (SDS).
Status
Commercial: Active
Availability
North America
Application
Bags & Pouches; Carpet Backing; Film Wrap; Lamination Film; Sealants; Specialty
Film; Wire & Cable
Market
Flexible Packaging; Wire & Cable
Processing Method
Blown Film; Cast Film; Wire & Cable
Ethylene Vinyl Acetate
Typical Properties
Nominal
Value
English
Units
Nominal
Value
SI
Units
Test Method
Physical
Equivalent Melt Index
2.1
g/10 min
2.1
g/10 min
ASTM D1238
Vinyl Acetate Content
18
%
18
%
LYB Method
Film
Dart Drop Impact Strength, F50
600
g
600
g
ASTM D1709
Tensile Strength at Break
MD
4900
psi
33.8
MPa
ASTM D882
TD
4600
psi
31.7
MPa
ASTM D882
Tensile Strength at Yield
MD
670
psi
4.6
MPa
ASTM D882
TD
600
psi
4.1
MPa
ASTM D882
Tensile Elongation at Break
MD
560
%
560
%
ASTM D882
TD
670
%
670
%
ASTM D882
Tensile Elongation at Yield
MD
14
%
14
%
ASTM D882
TD
12
%
12
%
ASTM D882
1% Secant Modulus
MD
7000
psi
48.3
MPa
ASTM D882
TD
7700
psi
53.1
MPa
ASTM D882
Elmendorf Tear Strength
MD
115
g
115
g
ASTM D1922
TD
220
g
220
g
ASTM D1922
Hardness
Shore Hardness, (Shore A)
91
91
ASTM D2240
Thermal
Vicat Softening Temperature, (A1)
142
°F
61
°C
ASTM D1525
Product Description
Ultrathene UE624000 is an EVA copolymer with excellent flexibility and low temperature properties. UE624000 is
selected by customers for use in medium to heavy gauge film applications as well as injection and blow molding.
Page 1 of 2
LyondellBasell
Technical Data Sheet
Date: 10/14/2024
Ultrathene UE624000
Recipient Tracking #:
Request #: 5308007
Notes
Data obtained from 2.0 mil (51 micron) film produced on a blown film line with a 4″ (102 mm) die, 370 °F (188
°C) melt temperature, 2.5:1 BUR, 0.025″ die gap at 60 lbs/hr.
The equivalent melt index figure is correlated from Melt Flow Rates obtained with ASTM D1238.
These are typical property values not to be construed as specification limits.
Processing Techniques
The maximum recommended melt temperature for Ultrathene UE624000 is 450 °F (232 °C).
Specific recommendations for resin type and processing conditions can only be made when the end use,
required properties and fabrication equipment are known.
Company Information
For further information regarding the LyondellBasell company, please visit http://www.lyb.com/.
© LyondellBasell Industries Holdings, B.V. 2018
Disclaimer
Information in this document is accurate to the best of our knowledge at the date of publication. The document is
designed to provide users general information for safe handling, use, processing, storage, transportation,
disposal and release and does not constitute any warranty or quality specification, either express or implied,
including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether the
product is suitable for their use and can be used safely and legally.
In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or
restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell
representative.
Trademarks
The Trademark referenced within the product name is owned or used by the LyondellBasell family of companies.
Low Temperature Brittleness
<-105 °F <-76 °C ASTM D746 Optical Haze 1.3 % 1.3 % ASTM D1003 Gloss, (45°) 90 90 ASTM D2457 Additive Slip None None LYB Method Antiblock None None LYB Method Page 2 of 2 LyondellBasell Technical Data Sheet Date: 10/14/2024 Ultrathene UE624000 Recipient Tracking #: Request #: 5308007