PE – LLDPE – MFI0.95 – Formosa

Nombre del producto: PE – LLDPE – MFI0.95 – FORMOSA – FORMOLENE L42009M
Categoría: Polietileno
Información del manual del producto: 10/15
Formolene® L42009M

Linear Low Density Polyethylene (LLDPE) Resin
Butene Copolymer for Film Extrusion Applications

Formolene® L42009M is a general-purpose film grade linear low density made using gas-phase technology.
The resin exhibits excellent toughness and strength when drawn down to thin gauges.

Formolene® L42009M meets all requirements of the U.S. Food and Drug Administration as specified in 21
CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

Suggested Applications:
Blending Resin
Industrial Liners
Industrial Packaging
Garment Bags
Co-Extrusion

Nominal Physical Properties:
PROPERTY
ASTM
TEST
METHOD

UNIT

VALUE
Density
D1505
g/cc
0.919
Melt Index, Condition E, 190C/2.16 kg
D1238
g/10 min.
0.95
Dart Impact
D1709
g/mil.
135
Tear Strength
D1922
g/mil.
160/400*
Tensile Strength at Break
D882
psi.
5,100/3,225*
Elongation
D882
%
700/815*
Gloss, 45
D523

36
Haze
D1003
%
27
* MD / TD

Available in the following additive packages:

Additive
L42009A
L42009B
L42009E2
L42009F
L42009H
L42009M
L42009PE**
Antiblock (ppm)
7500
None
1700
7000
None
8000
1700
Slip (ppm)
None
None
1350
1350
None
1500
1350
Special
Additives
talc based
–
Additives
synthetic
based
Additives
talc based
High
Antioxidant
Additives
talc based
Additives
synthetic
based
** Contains processing aid

Note: Film Properties based on 25 Micron blown film produced with a 2.5:1Blow Up Ratio. Actual film properties may vary depending on operating conditions and
additive packages. Film properties are not intended to be used as specifications.

Published 08/01/04, Revised 01/11/16