Polietileno Alathon M6080UV LyondellBasell

Nombre del producto: PE – HDPE – MFI7.9 – LYONDELLBASELL – M6080UV
Categoría: Polietileno
Información del manual del producto: Alathon M6080UV
Technical Data Sheet
Regulatory Status
For regulatory compliance information, see Alathon M6080UV Product Stewardship Bulletin (PSB) and Safety
Data Sheet (SDS). To obtain copies of these documents, please contact your LyondellBasell product safety
representative.
Status
Commercial: Active
Availability
North America
Application
Crates; Pallets/Trays/Tote Bins
Market
Rigid Packaging
Processing Method
Injection Molding
High Density Polyethylene
Typical Properties
Nominal
Value
English
Units
Nominal
Value
SI
Units
Test Method
Physical
Melt Flow Rate, (190 °C/2.16 kg)
7.9
g/10 min
7.9
g/10 min
ASTM D1238
Density
0.960
g/cm³
0.960
g/cm³
ASTM D1505
Bulk Density
37-39
lb/ft³
593-625
kg/m³
ASTM D1895
Spiral Flow
8.6
in
21.8
cm
LYB Method
Mechanical
Flexural Modulus
(1% Secant)
190000
psi
1310
MPa
ASTM D790
(2% Secant)
155000
psi
1070
MPa
ASTM D790
Flexural Young’s Modulus
205000
psi
1410
MPa
ASTM D790
Tensile Modulus, (1% Secant)
123000
psi
848
MPa
ASTM D638
Tensile Young’s Modulus
146000
psi
1010
MPa
ASTM D638
Tensile Stress at Break, (23 °C)
2300
psi
15.9
MPa
ASTM D638
Tensile Stress at Yield, (23 °C)
4250
psi
29.3
MPa
ASTM D638
Tensile Elongation at Break, (23 °C)
380
%
380
%
ASTM D638
Tensile Elongation at Yield, (23 °C)
11
%
11
%
ASTM D638
Impact
Notched Izod Impact Strength, (23 °C)
1.4
ft-lb/in
75
J/m
ASTM D256
Unnotched Impact Strength, (-18 °C)
No Break
No Break
ASTM D4812
Hardness
Shore Hardness, (Shore D, max)
70
70
ASTM D2240
Thermal
Vicat Softening Temperature
264
°F
129
°C
ASTM D1525
Low Temperature Brittleness, Fཥའ
<-105 °F <-76 °C ASTM D746 Deflection Temperature Under Load, (66 psi, Unannealed) 176 °F 80 °C ASTM D648 Melting Temperature 270.9 °F 132.7 °C ASTM D3418 Product Description Alathon M6080UV is a narrow molecular weight distribution homopolymer that exhibits enhanced flow characteristics and good balance of stiffness and impact resistance. Typical applications include cases, tote bins, crates and trays. M6080UV contains a UV stabilizer for outdoor applications. Page 1 of 2 LyondellBasell Technical Data Sheet Date: 8/7/2024 Alathon M6080UV Recipient Tracking #: Request #: 5166930 Notes Conditions of Tensile Stress and Elongation values are: 50 mm/min, Type IV specimen. Conditions of Flexural Modulus values are: 0.5 inches/min or 12.5 mm/min. Conditions of Tensile Modulus values are: 50 mm/min, Type I Specimen. Spiral Flow measures the number of inches of flow produced when molten resin is injected into a long, spiral channel (0.0625" insert), at a constant injection pressure of 1000 psi with a melt temperature of 440 °F. Deflection Temperature Under Load and Low Temperature Brittleness data are for control and development work and are not intended for use in design or predicting performance at elevated or sub-ambient temperatures. These are typical property values not to be construed as specification limits. Processing Techniques Specific recommendations for resin type and processing conditions can only be made when the end use, required properties and fabrication equipment are known. Company Information For further information regarding the LyondellBasell company, please visit http://www.lyb.com/. © LyondellBasell Industries Holdings, B.V. 2018 Disclaimer Information in this document is accurate to the best of our knowledge at the date of publication. The document is designed to provide users general information for safe handling, use, processing, storage, transportation, disposal and release and does not constitute any warranty or quality specification, either express or implied, including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether the product is suitable for their use and can be used safely and legally. In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell representative. Trademarks The Trademark referenced within the product name is owned or used by the LyondellBasell family of companies. Crystallization Temperature 240.6 °F 115.9 °C ASTM D3418 Page 2 of 2 LyondellBasell Technical Data Sheet Date: 8/7/2024 Alathon M6080UV Recipient Tracking #: Request #: 5166930