Petrothene NA204000 LyondellBasell

Nombre del producto: Petrothene NA204000
Categoría: Polietileno modificado
Información del manual del producto: Petrothene NA204000
Technical Data Sheet
Regulatory Status
For regulatory compliance information, see Petrothene NA204000 Product Stewardship Bulletin (PSB) and
Safety Data Sheet (SDS).
Status
Commercial: Active
Availability
North America
Application
Bags & Pouches; Caps & Closures; Colour Concentrates; Food Packaging Film;
Lamination Film; Sealants
Market
Flexible Packaging; Rigid Packaging
Processing Method
Extrusion Coating; Injection Molding
Low Density Polyethylene
Typical Properties
Nominal
Value
English
Units
Nominal
Value
SI
Units
Test Method
Physical
Melt Flow Rate, (190 °C/2.16 kg)
7.0
g/10 min
7.0
g/10 min
ASTM D1238
Density, (23 °C)
0.918
g/cm³
0.918
g/cm³
ASTM D1505
Mechanical
Flexural Modulus, (1% Secant)
31900
psi
233
MPa
ASTM D790
Tensile Strength at Break
1730
psi
12.1
MPa
ASTM D638
Tensile Strength at Yield
1430
psi
10.1
MPa
ASTM D638
Tensile Elongation at Break
550
%
550
%
ASTM D638
Tensile Elongation at Yield
19
%
19
%
ASTM D638
Hardness
Shore Hardness, (Shore D)
50
50
ASTM D2240
Thermal
Vicat Softening Temperature
186
°F
86
°C
ASTM D1525
Processing Parameters
Melt Temperature
<=625 °F <=329 °C Product Description Petrothene NA204000 is selected by customers for use in both extrusion coating and injection molding applications. NA204000 is a high speed, lightweight coating resin for use with paper, films and other base stocks. This resin can be extruded at line speeds of 1200 ft/min or higher. Products made from materials coated with NA204000 typically include general-purpose flexible packaging and snack food packaging. NA204000 yields excellent adhesion and heat sealing characteristics and low neck-in. When NA204000 is used in injection molding applications, it exhibits an excellent balance of toughness and softness, with excellent dimensional stability. Typical injection molding applications include housewares, toys, containers and novelty items. Page 1 of 2 LyondellBasell Technical Data Sheet Date: 8/12/2024 Petrothene NA204000 Recipient Tracking #: Request #: 5174566 Notes Tensile properties were run with a crosshead speed of 20 inches/min or 500 mm/min. Flexural Modulus properties were run with a crosshead speed of 0.5 inches/min or 12.5 mm/min. Mechanical tensile properties were run on a Type IV specimen. These are typical property values not to be construed as specification limits. Processing Techniques Specific recommendations for resin type and processing conditions can only be made when the end use, required properties and fabrication equipment are known. Company Information For further information regarding the LyondellBasell company, please visit http://www.lyb.com/. © LyondellBasell Industries Holdings, B.V. 2018 Disclaimer Information in this document is accurate to the best of our knowledge at the date of publication. The document is designed to provide users general information for safe handling, use, processing, storage, transportation, disposal and release and does not constitute any warranty or quality specification, either express or implied, including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether the product is suitable for their use and can be used safely and legally. In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell representative. Trademarks The Trademark referenced within the product name is owned or used by the LyondellBasell family of companies. Page 2 of 2 LyondellBasell Technical Data Sheet Date: 8/12/2024 Petrothene NA204000 Recipient Tracking #: Request #: 5174566