PP RANDOM MFI35 Formosa Plastics

Nombre del producto: PP – RANDOM – MFI35 – FORMOSA – FORMOLENE 3435E
Categoría: Polipropileno
Información del manual del producto: 10/15
Formolene® 3435E

Random Copolymer for Clear Storage Containers and Food and Beverage
Containers

Formolene® 3435E is a high melt flow random copolymer with fast cycle time and easy mold release. It is designed for
injection molding including thin wall applications requiring a higher level of impact resistance. Its clarity and low
yellow index makes it an excellent choice for ‘see-through’ house wares and rigid packaging.

Formolene® 3435E meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR
177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For
additional information on approved conditions of use for food contact applications, please refer to the “Products”
section on our website (http://www.fpcusa.com/ourproducts.html).

This material is free of animal-derived content.

Typical Properties of this Commercial Grade
Typical Values
Property
Test Method
English
SI
Melt Flow Rate, I2 @ 230°C
ASTM D1238
35
g/10 min
35
g/10 min
Density
ASTM D1505
0.9
g/cm3
0.9
g/cm3
Tensile Strength at Yield (50 mm/min)
ASTM D638
3,800
psi
26
MPa
Elongation at Yield (50 mm/min)
ASTM D638
16
%
16
%
Flexural Modulus (1.3 mm/min), 1% Secant
ASTM D790
130,000
psi
896
MPa
Rockwell Hardness
ASTM D785
100
R Scale
100
R Scale
Gardner Impact @ 73°F
ASTM D5420
225
in-lb
25
J
Notched Izod Impact Strength @ 73°F
ASTM D256A
1.5
ft-lb/in
80
J/m
Heat Deflection Temperature @ 66 psi
ASTM D648
162
°F
71
°C
Plaque Haze, %
FPC method
10
%
10
%
Specimens were injection molded according to the conditions specified in ASTM D4101. Data for representative purposes only;
not to be construed as product specification. Published 2/12, Revised 3/18