PBT + ASA S4090 MHolland

Nombre del producto: PBT – – MHOLLAND – ULTRADUR S4090 G6 LS BK15077
Categoría: Otros
Información del manual del producto: Ultradur® S 4090 G6 LS BK15077
BASF Corporation – Polybutylene Terephthalate + ASA
Tuesday, February 13, 2024
www.ulprospector.com
UL LLC ©2024. All rights reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no
responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection
information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within
our control, and we cannot and will not take responsibility for the information or content.
Page: 1 of 2
General Information
Product Description
Ultradur S 4090 G6 LS BK15077 is a 30% glass reinforced PBT + ASA blend. It produces moldings with good surface finish and is resistant to
chemicals and stress cracking. It has low shrinkage and warpage.
General
Material Status
• Commercial: Active
Availability
• North America
Filler / Reinforcement
• Glass Fiber, 30% Filler by Weight
Features
• Chemical Resistant
• Good ESCR (Stress Crack
Resist.)
• Good Surface Finish
• Low Shrinkage
• Low Warpage
Agency Ratings
• EC 1907/2006 (REACH)
RoHS Compliance
• RoHS Compliant
Automotive Specifications
• FORD WSK-M4D896-A1
• GM GMP.PBT+ASA.002 Color:
Black
• GM GMP.PBT+ASA.002 Color:
Natural
Appearance
• Black
Forms
• Pellets
Processing Method
• Injection Molding
ASTM & ISO Properties 1
Physical
Nominal Value Unit
Test Method
Density
1.47 g/cm³
ISO 1183
Water Absorption (Saturation, 73°F)
0.40 %
ISO 62
Water Absorption (Equilibrium, 73°F, 50% RH)
0.20 %
ISO 62
Viscosity Number (Reduced Viscosity)
111.0 ml/g
ISO 1628
Mechanical
Nominal Value Unit
Test Method
Tensile Stress (Break, 73°F)
17400 psi
ISO 527-2
Tensile Strain (Break, 73°F)
2.3 %
ISO 527-2
Flexural Modulus (73°F)
1.23E+6 psi
ISO 178
Impact
Nominal Value Unit
Test Method
Notched Izod Impact Strength (73°F)
3.3 ft·lb/in²
ISO 180
Thermal
Nominal Value Unit
Test Method
Deflection Temperature Under Load
ISO 75-2/A
264 psi, Unannealed
378 °F
Melting Temperature (DSC)
433 °F
ISO 3146
Ultradur® S 4090 G6 LS BK15077
BASF Corporation – Polybutylene Terephthalate + ASA
www.ulprospector.com
UL LLC ©2024. All rights reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no
responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection
information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within
our control, and we cannot and will not take responsibility for the information or content.
Page: 2 of 2
Processing Information
Injection
Nominal Value Unit
Drying Temperature
212 to 248 °F
 
Drying Time
4.0 hr
 
Suggested Max Moisture
0.040 %
 
Processing (Melt) Temp
482 to 518 °F
 
Mold Temperature
140 to 212 °F
 
Injection Pressure
508 to 1810 psi
 
Injection Rate
Fast  
 
Back Pressure
< 145 psi   Notes 1 Typical properties: these are not to be construed as specifications. Corporate Offices:   400 Skokie Boulevard, Suite 600             Northbrook, IL 60062             800.872.7370             In Illinois: 847.272.7370             Customer Service FAX: 847.272.7713