Resina Polietileno LD 100.BW ExxonMobil

Nombre del producto: PE – LDPE – MFI2 – EXXONMOBIL – LD 100.BW
Categoría: Polietileno
Información del manual del producto: Product Datasheet
ExxonMobil™ LDPE LD 100.BW
Low Density Polyethylene Resin
Product Description
LD 100.BW is a LDPE grade, offering a good balance of optical and mechanical properties.
General
Availability 1
• Latin America
• North America
Additive
• Antiblock: No
• Slip: No
• Thermal Stabilizer: Yes
Applications
• Blend Partner
• Cast Film
• Compounding
• Foams
• Form Fill And Seal Packaging
• Freezer Film
• Lamination Film
• Light Duty Shrink Film
• Liners
• Mail Bag
• Produce Bags
• Shoppers
• Textile Packaging
• Tough Medium Sized Molding
Revision Date
• 06/17/2020
Resin Properties
Typical Value (English)
Typical Value (SI)
Test Based On
Density
0.923 g/cm³
0.923 g/cm³
ASTM D1505
Melt Index (190°C/2.16 kg)
2.0 g/10 min
2.0 g/10 min
ASTM D1238
Peak Melting Temperature
228 °F
109 °C
ExxonMobil
Method
Thermal
Typical Value (English)
Typical Value (SI)
Test Based On
Vicat Softening Temperature
196 °F
91.0 °C
ExxonMobil
Method
Film Properties
Typical Value (English)
Typical Value (SI)
Test Based On
Tensile Strength at Yield MD
1500 psi
10 MPa
ASTM D882
Tensile Strength at Yield TD
1600 psi
11 MPa
ASTM D882
Tensile Strength at Break MD
4300 psi
30 MPa
ASTM D882
Tensile Strength at Break TD
3300 psi
23 MPa
ASTM D882
Elongation at Break MD
240 %
240 %
ASTM D882
Elongation at Break TD
550 %
550 %
ASTM D882
Secant Modulus MD – 1% Secant
30000 psi
200 MPa
ASTM D882
Secant Modulus TD – 1% Secant
37000 psi
260 MPa
ASTM D882
Dart Drop Impact
110 g
110 g
ASTM D1709A
Elmendorf Tear Strength MD
290 g
290 g
ASTM D1922
Elmendorf Tear Strength TD
100 g
100 g
ASTM D1922
Puncture Force
11 lbf
48 N
ExxonMobil
Method
Puncture Energy
12 in·lb
1.3 J
ExxonMobil
Method
Optical Properties
Typical Value (English)
Typical Value (SI)
Test Based On
Gloss (45°)
69
69
ASTM D2457
Haze
5.6 %
5.6 %
ASTM D1003
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement
Film (1.5 mil/38.1 micron) made from LD 100.BW resins on a 2.5 inch (63.5 mm) blown film line with a 2.5:1 blow-up ratio, a melt temperature of
340-360°F (171-182°C), a 30 mil (0.76 mm) die gap at a rate of 8 lbs/hr/in die circumference (1.43 kg/hr/cm).
Effective Date: 06/17/2020
ExxonMobil
Page: 1 of 2
Product Datasheet
ExxonMobil™ LDPE LD 100.BW
Low Density Polyethylene Resin
Notes
Typical properties: these are not to be construed as specifications.
1 Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete
Country Availability.
For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs
©2024 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of
ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil’s prior written
authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document
is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it
in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of
representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when
not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not
represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent
infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely
responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability
for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in
this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication.
The terms “we,” “our,” «ExxonMobil Product Solutions» and «ExxonMobil» are each used for convenience, and may include any one or more of
ExxonMobil Product Solutions Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.
exxonmobilchemical.com
Effective Date: 06/17/2020
ExxonMobil
Page: 2 of 2