Polietileno metalloceno lineal de baja densidad 3.5 Chevron Phillips

Nombre del producto: PE – MDPE – MFI3.5 – CHEVRON PHILLIPS – PRIMATOP TGS LL 032917
Categoría: Polietileno modificado
Información del manual del producto: For more information and technical
assistance contact:

Chevron Phillips Chemical
P.O. Box 4910
The Woodlands, TX 77387-4910
800.231.1212

SUPERIOR FLEXIBLE PACKAGING RESINS

Revision Date: August, 2021

Before using this product, the user is advised and cautioned to make its own determination and assessment of the safety and
suitability of the product for the specific use in question and is further advised against relying on the information contained
herein as it may relate to any specific use or application. It is the ultimate responsibility of the user to ensure that the product is
suited and the information is applicable to the user’s specific application. Chevron Phillips Chemical Company LP does not
make, and expressly disclaims, all warranties, including warranties of merchantability or fitness for a particular purpose,
regardless of whether oral or written, express or implied, or allegedly arising from any usage of any trade or from any course of
dealing in connection with the use of the information contained herein or the product itself. The user expressly assumes all risk
and liability, whether based in contract, tort or otherwise, in connection with the use of the information contained herein or the
product itself. Further, information contained herein is given without reference to any intellectual property issues, as well as
federal, state or local laws which may be encountered in the use thereof. Such questions should be investigated by the user.

Page 1 of 1

Marlex® D173 Polyethylene
METALLOCENE LINEAR LOW DENSITY POLYETHYLENE (mLLDPE)

This metallocene linear low density polyethylene is
an ethylene-hexene copolymer tailored for cast film
applications that require:
•
Superior clarity
•
Excellent gloss
•
Exceptional toughness
•
Outstanding heat seal

Typical cast film applications include:
•
Stretch wrap
•
Overwrap
•
Coextrusions

Nominal Resin Properties
English
SI
Method
Melt Index, 190 °C/2.16 kg
—
3.5 g/10 min
ASTM D1238
Density
—
0.918 g/cm3
ASTM D1505
Slip
None
None
—
Antiblock
None
None
—
Process Aid
None
None
—

Nominal Cast Film Properties at 1 mil1
English
SI
Method
Haze
2 %
2 %
ASTM D1003
Gloss, 60°
140
140
ASTM D2457
COF
> 1
> 1
ASTM D1894
Dart
—
450 g/mil
ASTM D1709
Elmendorf Tear MD/TD
—
300/500 g/mil
ASTM D1922
Tensile Strength at Yield MD/TD
1500/1300 psi
10/9 MPa
ASTM D882
Tensile Strength at Break MD/TD
7800/5500 psi
54/38 MPa
ASTM D882
Tensile Elongation at Break MD/TD
500/580 %
500/580 %
ASTM D882
1 % Secant Modulus MD/TD
15000/16000 psi
103/110 MPa
ASTM D882
Seal Initiation Temperature2
214 °F
101 °C
ASTM F88

1. Produced on a cast film line at 200 lb/h, 25 mil die gap, 550 °F melt temperature
2. Temperature at which 0.3 lb/in heat seal strength is achieved. 0.5 s dwell, 30 psi pressure, 11.8 in/min separation rate.