Resina Polietileno LLDPE Formolene L42022E2 Formosa Plastics

Nombre del producto: PE – LLDPE – MFI2 – FORMOSA – FORMOLENE L42022E2
Categoría: Polietileno
Información del manual del producto: 10/15
Formolene® L42022E2

Linear Low Density Polyethylene (LLDPE) Resin
Butene Copolymer for Film Extrusion Applications

Formolene® L42022E2 is a general-purpose film grade linear low density made using gas-phase technology.
Formolene® L42022E2 exhibits excellent toughness and strength when drawn down to thin gauges in blown
and cast film applications.

Formolene® L42022E2 meets all requirements of the U.S. Food and Drug Administration as specified in 21
CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

Suggested Applications:
Blending Resin
Industrial Liners
Industrial Packaging
Garment Bags
Co-Extrusion

Nominal Physical Properties:
PROPERTY**
ASTM
TEST
METHOD

UNIT

VALUE
Density
D1505
g/cc
0.919
Melt Index, Condition E,

190C/2.16 kg
D1238
g/10
min.
2.0
Dart Impact
D1709
g/mil.
65
Tear Strength
D1922
g/mil.
110/570*
Tensile Strength at Break
D882
psi.
3,900/2,700*
Elongation
D882
%
600/800*
Gloss, 45
D523

40
Haze
D1003
%
35
* MD / TD

Available in the following additive packages:

Additive
L42022B
L42022E2
Antiblock (ppm)
None
7000
Slip (ppm)
None
1350
Special
–
Additives
talc based

Note: Film Properties based on 25 Micron blown film produced with a 2.5:1Blow Up Ratio. Actual film properties may vary depending on operating
conditions and additive packages. Film properties are not intended to be used as specifications.

Published 08/01/04, Revised 01/11/16