PE-Enable 2010 RA-ExxonMobil

Nombre del producto: PE-Enable 2010 RA-EXXONMOBIL
Categoría: Polietileno
Información del manual del producto: Product Datasheet
Enable™ 2010RA
Performance Polymer
Product Description
Enable™ 2010RA is an ethylene 1-hexene copolymer resin. Enable™ performance polymer resins offer an outstanding balance between processing
and film properties, including tensile, impact and puncture. Fluoropolymers, or fluorine-containing compounds, and TNPP are not
intentionally added to Enable™ 2010RA.
General
Availability 1
• Africa & Middle East
• Asia Pacific
• Europe
• Latin America
• North America
Additive
• Antiblock: No
• Slip: No
• Thermal Stabilizer: Yes
• Alternative Processing Aid: Yes
Applications
• Agricultural Film
• Blown Film
• Cast Film
• Cast Stretch Film
• Food Packaging
• Form Fill And Seal Packaging
• Heavy Duty Bags
• Lamination Film
• Multilayer Packaging Film
• Shrink Film
• Stand Up Pouches
• Stretch Film
Form(s)
• Pellets
Revision Date
• 03/17/2023
Resin Properties
Typical Value (English)
Typical Value (SI)
Test Based On
Density / Specific Gravity
0.920 g/cm³
0.920 g/cm³
ASTM D792
Melt Index (190°C/2.16 kg)
1.0 g/10 min
1.0 g/10 min
ASTM D1238
Peak Melting Temperature
237 °F
114 °C
ExxonMobil
Method
Thermal
Typical Value (English)
Typical Value (SI)
Test Based On
Vicat Softening Temperature
223 °F
106 °C
ExxonMobil
Method
Film Properties
Typical Value (English)
Typical Value (SI)
Test Based On
Tensile Strength at Yield MD
1400 psi
9.6 MPa
ASTM D882
Tensile Strength at Yield TD
1500 psi
10 MPa
ASTM D882
Tensile Strength at Break MD
7900 psi
50 MPa
ASTM D882
Tensile Strength at Break TD
7500 psi
50 MPa
ASTM D882
Elongation at Break MD
510 %
510 %
ASTM D882
Elongation at Break TD
720 %
720 %
ASTM D882
Secant Modulus MD – 1% Secant
29000 psi
200 MPa
ASTM D882
Secant Modulus TD – 1% Secant
33000 psi
230 MPa
ASTM D882
Dart Drop Impact
180 g
180 g
ASTM D1709A
Elmendorf Tear Strength MD
130 g
130 g
ASTM D1922
Elmendorf Tear Strength TD
550 g
550 g
ASTM D1922
Puncture Force
11 lbf
47 N
ExxonMobil
Method
Puncture Energy
28 in·lb
3.2 J
ExxonMobil
Method
Optical Properties
Typical Value (English)
Typical Value (SI)
Test Based On
Gloss (45°)
62
62
ASTM D2457
Haze
7.0 %
7.0 %
ASTM D1003
Effective Date: 03/17/2023
ExxonMobil
Page: 1 of 2
Product Datasheet
Enable™ 2010RA
Performance Polymer
Legal Statement
Fluoropolymers, or fluorine-containing compounds, and tris(nonylphenol) phosphite (TNPP) CAS# 26523-78-4 are not intentionally used by
ExxonMobil in this product. Although this product is not routinely tested for their presence, based on product composition knowledge these
substances are not expected to be present. However, the fact that these substances are not intentionally used by ExxonMobil in this product does
not exclude that trace levels of these substances may be present as a result of the specific characteristics of the raw materials and/or of the
manufacturing process.

This product is not intended for use in medical applications and should not be used in any such applications.

Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
Processing Statement
Film (1 mil/25.4 micron) made on a 2.5 inch (63.5 mm) blown film line with a 2.5:1 blow-up ratio, a melt temperature of 380-400°F (193-204°C), a
30 mil (0.76 mm) die gap at a rate of 10 lbs/hr/in die circumference (1.79 kg/hr/cm).
Notes
Typical properties: these are not to be construed as specifications.
1 Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete
Country Availability.
For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs
©2024 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of
ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil’s prior written
authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document
is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it
in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of
representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when
not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not
represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent
infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely
responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability
for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in
this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication.
The terms “we,” “our,” «ExxonMobil Product Solutions» and «ExxonMobil» are each used for convenience, and may include any one or more of
ExxonMobil Product Solutions Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.
exxonmobilchemical.com
Effective Date: 03/17/2023
ExxonMobil
Page: 2 of 2