Formolene FR2375D Polietileno Formosa Plastics

Nombre del producto: PE – LDPE – MFI0.75 – FORMOSA – FORMOLENE FR2375D
Categoría: Polietileno
Información del manual del producto: 1/19
Formolene® FR2375D

Fractional Melt LDPE Resin with 500 ppm Slip and 450 ppm Antiblock
Formolene® FR2375D is a low density polyethylene with films exhibiting good mechanical and optical
properties in blends.
Formolene® FR2375D is formulated with slip and antiblock for use in film applications offering excellent
extrusion processing and very good balance of mechanical and optical properties.

Suggested Applications:

Agricultural Film Collation Shrink Medium Duty Shrink Film

Blend Partner Freezer Film Shoppers
Co-Extrusion Films Lamination Film Form Fill and Seal Packaging

Nominal Physical Properties:

PROPERTY
TEST
METHOD

UNIT

VALUE
Density
D1505
g/cc
0.923
Melt Index, Condition E, 190ºC/2.16 kg
D1238
g/10 min
0.75
Dart Impact
D1709
g
180
Elmendorf Tear Strength
D1922
g
350/150*
Tensile Strength at Break
D882
psi
4000/3200*
Elongation at Break
D882
%
310/530*
Secant Modulus @ 1%
D882
psi
35000/40000*
Gloss (45°)
D2457

59
Haze
D1003
%
8.4
* MD / TD

Note: Film properties based on 1.97 mil (50 micron) thick film produced using a 7.9 inch (200 mm) die and 39.4 mil (1.0 mm) die
gap with a 2.5:1 Blow-Up Ratio and temperature profile of 356 – 374° F (180 – 190°C). Actual film properties may vary based on
extrusion equipment, operating conditions and additive package. Film properties are not intended to be used as specifications.

Published 07/15/19