Formolene HB4903 Polietileno Alta Densidad Formosa

Nombre del producto: PE – HDPE – MFI0.3 – FORMOSA – FORMOLENE HB4903
Categoría: Polietileno
Información del manual del producto: 10/15

Formolene® HB4903

High Density Polyethylene (HDPE) Resin
Designed for High ESCR Blow Molding Applications

Formolene® HB4903 is a high performance copolymer that is designed for the most demanding blow
molding applications. It is also utilized in many sheeting applications. This resin has exceptional stress
crack resistance, excellent surface appearance, good melt strength, and good processability.

Formolene® HB4903 meets all the requirements of the U.S. Food and Drug Administration as specified
in 21 CFR 177.1520 for food packaging at temperatures not exceeding 212F (100C).

Suggested Applications:
Fuel Tanks
Garbage Cans

Seating
Large Industrial Containers
Sheet

Nominal Physical Properties:

PROPERTY*
ASTM
TEST
METHOD

ENGLISH
Unit Value

SI
Unit Value
Density
D1505
g/cc
0.949
g/cc
0.949
Melt Index, Condition E,

190C/2.16 kg
D1238
g/10 min.
0.30
g/10 min.
0.30
Environmental Stress Crack
Resistance (ESCR)

Condition B (100% Igepal), F50

D1693

h

500

h

500
Tensile Yield Strength,

2” (50 mm) per min.
D638
Type IV
psi.
3600
MPa
25
Ultimate Elongation,

2” (50 mm) per min.
D638
Type IV
%
>600
%
>600
Brittleness Temperature
D746
F
<-180 C <-118 * Physical properties reported herein were determined on compression molded specimens prepared in accordance with Procedure C of ASTM D1928. The nominal properties reported herein are typical of the product but do not reflect normal testing variance and therefore should not be used for specification purposes. Published 6/01/01, Revised 1/04/16