Polietileno PE-6109-PEMEX

Nombre del producto: PE-6109-PEMEX
Categoría: Polietileno
Información del manual del producto: Distribuidora Don Ramis SA. de CV.
BDL 92020 S
LINEAR LOW DENSITY POLYETHYLENE
LDPE EXTRUSION
Flow Index
Density
Features:
Applications:
Additives:
* Contains no slip and no antiblock.
PARAMETER
UNIT
TEST
METHOD
TYPICAL
VALUE **
Presentation
* 25kg. Sacks
* Pellets
2.0 g/10min
0.918 g/cm 3
** Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, and with the
European standards 85/572/EEC, 90/128/EEC y 97/48/EEC covering safe use of polyolefin articles intended for direct
food contact.
*** The reported values are typical and do not constitute a warranty but a guide for the diverse application possibilities.
* Coextrusion
* Tubular film
* Bags
* Film for automatic packing

Flow Index
g/10 min.
ASTM D – 1238
Density
g/cm3
ASTM D – 792
FILM PROPERTIES
Tensile Strength @ Yield

MPa
ASTM D – 638
Tensile Strength @ Break

MPa
ASTM D – 638
Tensile Modulus 1% Secant
MPa
ASTM D – 638
Tensile Elongation @ Brk
%
ASTM D – 638
Film properties (25 µm)
Tensile Modulus 1% Secant
MPa
ASTM D – 882
Tensile Strength @ Break

MPa
ASTM D – 882
Tensile Strength @ Yield

MPa
ASTM D – 882
Tensile Elongation @ Brk
%
ASTM D – 882
Dart Drop Impact (cal 50 µm)
g
ASTM D – 1709
Tearing resistance
kN/m
ASTM D – 1922
Haze
%
ASTM D -1003
Film Appearance
Unidades
UCC PEG – 511
BDL 92010-S is a certified prime resin containing Butene, specially designed for production of
Blown films for general purpose packaging.
BDL 92010-S features easy processability with very good film strength.
Said compound has excellent processability for blow molding and extrusion with low and high
density Polyethylene.
2.0
0.918
10
16
230
750
195/220 (1)
31/23 (1)
10/10 (1)
450/600 (1)
85
31/123 (1)
12
+20