Formolene FL2202A Polietileno Formosa Plastics

Nombre del producto: PE – LLDPE – MFI2 – FORMOSA – FORMOLENE FL2202A
Categoría: Polietileno
Información del manual del producto: 02/20
Formolene® FL2202A
Liner LDPE Resin with Slip and Antiblock
Formolene® FL2202A is a low density polyethylene offering good balance of optical and mechanical
properties. Formolene® FL2202A is formulated with slip and antiblock for use in film applications
offering excellent extrusion processing and film optical properties.

Suggested Applications:
Blend Partner Light Duty Shrink Film Mail Bags
Cast Film Freezer Film Produce Bags
Food Packaging Lamination Film Shoppers
Foams Compounding Textile Packaging
Liners Form Fill and Seal Packaging

Nominal Physical Properties:
PROPERTY
TEST
METHOD
UNIT
VALUE
Density
D1505
g/cc
0.923
Melt Index, Condition E, 190C°/2.16 kg
D1238
g/10 min
2.0
Dart Impact
D1709
g
80
Elmendorf Tear Strength
D1922
g
150/120*
Tensile Strength at Yield
D882
psi
1600/1600*
Tensile Strength at Break
D882
psi
3600/3200*
Elongation at Break
D882
%
330/550*
Secant Modulus @ 1%
D882
psi
30000/33000*
Gloss (45°)
D2457

63
Haze
D1003
%
6.1
* MD / TD
Note: Film properties based on 1.5 mil (38.1 micron) thick film produced on a 2.5 inch (63.5 mm ) blown film line with a
2.5:1 blowup ratio, a melt temperature of 340-360°F (171-182°C), a 30 mil (0.76 mm) die gap at a rate of 8 lbs/hr/in die
circumference (1.43kg/hr/cm). Actual film properties may vary based on extrusion equipment, operating conditions and
additive package. Film properties are not intended to be used as specifications.
Published 12/1/2020