PE – HDPE – MFI0.65 – Formosa

Nombre del producto: PE – HDPE – MFI0.65 – FORMOSA – FORMOLENE HP6000
Categoría: Polietileno
Información del manual del producto: 10/15
Formolene® HP6000

High Density Polyethylene (HDPE) Resin
Homopolymer for Various Extrusion Applications

Formolene® HP6000 is a high quality product for homopolymer pipe extrusion applications. It has excellent
stiffness and good stiffness properties.

Suggested Applications:
Corrugated Pipe
Drain Tile
Composite Lumber

Nominal Physical Properties:

PROPERTY*
ASTM
TEST
METHOD

ENGLISH
Unit Value

SI
Unit Value
Density
D1505
g/cc
0.964
g/cc
0.964
Melt Index, Condition E,

190C/2.16 kg
D1238
g/10 min.
0.65
g/10 min.
0.65
Environmental Stress Crack
Resistance (ESCR)

Condition A, F50 (100% Igepal)

Condition B, F50

D1693
D1693

h
h

15-20
10

h
h

15 –20
10
Tensile Yield Strength,

2” (50 mm) per min.
D638
Type IV
psi.
4400
MPa
30
Ultimate Elongation,

2” (50 mm) per min.
D638
Type IV
%
>300
%
>300
Brittleness Temperature
D746
°F
<-180 °C <-118 Flexural Modulus D790 psi. 240,000 MPa 1654 * Physical properties reported herein were determined on compression molded specimens prepared in accordance with Procedure C of ASTM D1928. The nominal properties reported herein are typical of the product but do not reflect normal testing variance and therefore should not be used for specification purposes. Published 08/01/04, Revised 01/12/16