Polipropileno Homopolímero 5143H Formosa Plastics

Nombre del producto: PP – HOPP – MFI21 – FORMOSA – 5143H
Categoría: Polipropileno
Información del manual del producto: 10/15
Formolene® 5143H

Homopolymer for Extrusion Sheet and Thermoforming Applications

Formolene® 5143H is a polypropylene homopolymer designed for sheet and thermoforming applications
requiring good clarity. It contains a unique combination of stabilizers and nucleation that give it an excellent
balance of stiffness and impact strength. Formolene® 5143H offers advantages in processing over other
polypropylenes used for thermoforming, including a broad forming window and fast setup time.

Formolene® 5143H meets the requirements of the U.S. Food and Drug Administration as specified in 21
CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food
contact. For additional information on approved conditions of use for food contact applications, please refer
to the “Products” section on our web site (http://www.fpcusa.com/ourproducts.html).

This material is free of animal-derived content.

Typical Properties of this Commercial Grade
Typical Values
Property
Test Method
English
SI
Melt Flow Rate, I2 @ 230°C
ASTM D1238
2.1 g/10 min
2.1 g/10 min
Density
ASTM D1505
0.9 g/cm3
0.9 g/cm3
Tensile Strength at Yield (50 mm/min)
ASTM D638
5,300 psi
37 MPa
Elongation at Yield (50 mm/min)
ASTM D638
6 %
6 %
Flexural Modulus (1.3 mm/min), 1%
Secant
ASTM D790
245,000 psi
1690 MPa
Notched Izod Impact Strength @ 73°F
ASTM D256A
0.7 ft-lb/in
37 J/m
Heat Deflection Temperature @ 66 psi
ASTM D648
241 °F
116 °C
Note: Specimens were injection molded according to the conditions specified in ASTM D4101.
Data for representative purposes only; not to be construed as product specification. Published 08/03, Revised 11/15