Polietileno CE67FC Celanese

Nombre del producto: PE – POM – MFI23 – CELANESE – CELCON CE67FC
Categoría: Polietileno
Información del manual del producto: Celanese Engineered Materials Product Data Datasheet
Experimental
CELCON CE67FC | Unfilled
General purpose improved flow
Description
Celcon acetal copolymer grade CE67FC is a improved flow polymer providing good performance in
general purpose injection molding and extrusion of thin walled tubing and thin gauge film. This grade
provides overall excellent performance in many applications.
Chemical abbreviation according to ISO 1043-1: POM
UL94 Flammability HB
Compliant to many global Food and Drinking Water regulatory requirements. Contact Celanese for
details.
Physical Properties
Value Unit
Test Standard
Density
ISO 1183
kg/m³
1410
Melt volume rate (MVR)
ISO 1133
cm³/10min
23.0
MVR test temperature
ISO 1133
°C
190
MVR test load
ISO 1133
kg
2.16
Mold shrinkage – parallel
ISO 294-4
%
1.7
Mold shrinkage – normal
ISO 294-4
%
1.6
Mechanical Properties
Value Unit
Test Standard
Tensile modulus (1mm/min)
ISO 527-2/1A
MPa
2800
Tensile stress at yield (50mm/min)
ISO 527-2/1A
MPa
65
Tensile strain at yield (50mm/min)
ISO 527-2/1A
%
8.0
Charpy notched impact strength @ 23°C
ISO 179/1eA
KJ/m²
5.0
Thermal Properties
Value Unit
Test Standard
Melting temperature (10°C/min)
ISO 11357-1,-2,-3
°C
166
DTUL @ 1.8 MPa
ISO 75-1, -2
°C
100
Coeff. of linear therm expansion (parallel)
ISO 11359-2
E-4/°C
1.2
Coeff. of linear therm expansion (normal)
ISO 11359-2
E-4/°C
1.2
Test Specimen Production
Value Unit
Test Standard
Processing conditions acc. ISO
Internal
9988-2
Processing and Delivery Form
Value Unit
Test Standard
Injection molding
Internal
Yes
Profile extrusion
Internal
Yes
Pellets
Internal
Yes
2
September 30, 2016
Page
1
of
Celanese Engineered Materials Product Data Datasheet
Disclaimer
Disclaimer:
«This publication was printed based on Celanese’s present state of knowledge, and Celanese undertakes no obligation to
update it. Because conditions of product use are outside Celanese’s control, Celanese makes no warranties, express or implied,
and assumes no liability in connection with any use of this information. Nothing herein is intended as a license to operate under
or a recommendation to infringe any patents.
NOTICE TO USERS: Values shown are based on testing of laboratory test specimens and represent data that fall within the
standard range of properties for natural material. These values alone do not represent a sufficient basis for any part design and
are not intended for use in establishing maximum, minimum, or ranges of values for specification purposes. Colorants or other
additives may cause significant variations in data values.
Properties of molded parts can be influenced by a wide variety of factors including, but not limited to, material selection,
additives, part design, processing conditions and environmental exposure. Any determination of the suitability of a particular
material and part design for any use contemplated by the users and the manner of such use is the sole responsibility of the
users, who must assure themselves that the material as subsequently processed meets the needs of their particular product or
use.
To the best of our knowledge, the information contained in this publication is accurate; however, we do not assume any liability
whatsoever for the accuracy and completeness of such information. The information contained in this publication should not be
construed as a promise or guarantee of specific properties of our products. It is the sole responsibility of the users to investigate
whether any existing patents are infringed by the use of the materials mentioned in this publication.
Moreover, there is a need to reduce human exposure to many materials to the lowest practical limits in view of possible adverse
effects. To the extent that any hazards may have been mentioned in this publication, we neither suggest nor guarantee that
such hazards are the only ones that exist. We recommend that persons intending to rely on any recommendation or to use any
equipment, processing technique or material mentioned in this publication should satisfy themselves that they can meet all
applicable safety and health standards.
We strongly recommend that users seek and adhere to the manufacturer’s current instructions for handling each material they
use, and entrust the handling of such material to adequately trained personnel only. Please call the telephone numbers listed
(+49 (0) 69 30516299 for Europe, +1 859-372-3244 for the Americas and +86 21 3861 9266 for Asia) for additional technical
information. Visit our web site for the appropriate Safety Data Sheets (SDS) before attempting to process our products. Feel
free to call Customer Services for additional assistance.
The products mentioned herein are not intended for use in medical or dental implants.
© 2014 Celanese or its affiliates. All rights reserved. (Published 26.September.2014)
Celanese®, registered C-ball design and all other trademarks identified herein with ®, TM, SM, unless otherwise noted, are
trademarks of Celanese or its affiliates. Fortron is a registered trademark of Fortron Industries LLC.»
Celanese Engineered Materials
Americas
Celanese
Product Information Service
8040 Dixie Highway
Florence, KY 41042
USA
Tel.: +1-800-833-4882
Tel.: +1-859-372-3244
email: [email protected]
Celanese on the web: www.celanese.com
Customer Service
Tel.: +1-800-526-4960
Tel.: +1-859-372-3214
2
September 30, 2016
Page
2
of