Formolene LB1810E2 PE LLDPE Formosa Plastics

Nombre del producto: PE – LLDPE – MFI1 – FORMOSA – FORMOLENE LB1810E2
Categoría: Polietileno
Información del manual del producto: 6/19
Formolene® LB1810E2

Linear Low Density Polyethylene (LLDPE) Resin for Film Extrusion Applications

Formolene® LB1810E2 is a butene based linear low density polyethylene copolymer designed for blown film
applications.

Formolene® LB1810E2 meets all requirements of the U.S. Food and Drug Administration as specified in 21
CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

Suggested Applications:
Agricultural Films Industrial Liners Industrial Packaging Garment Bags

Additives:
Antiblock – 5000 ppm Slip – 1500 ppm Processing Aid – No

Nominal Values
PROPERTY
ASTM TEST
METHOD
ENGLISH
Unit Value
SI
Unit Value
Base Density
Internal Method
g/cm3
0.918
g/cm3
0.918
Melt Index (190 C, 2.16 kg)
D1238
g/10 min
1.0
g/10 min
1.0
Tensile Strength at Yield
D882
psi
1550/1600*
MPa
10.7/11.0*
Tensile Strength at Break
D882
psi
5300/3900*
MPa
36.5/26.9*
Tensile Elongation at Break
D882
%
580/690*
%
580/690*
Dart Impact
D1709A
g
90
g
90
Elmendorf Tear Strength
D1922
g
170/320*
g
170/320*

* MD/TD

Available in the following additive packages:

Additive
LB1810B
LB1810A
LB1810E2

Density (g/cm3)
ASTM D792
0.918
0.920
0.922

Antiblock (ppm)
None
4000
5000

Slip (ppm)
None
None
1500

Processing aid
None
None
None

Special
High Antioxidant
Additives talc based Additives talc based

Note: Film properties are based on 1.0 mil (25 μm) thickness blown film produced with a 2.5:1 blow-up ratio at 12 lb/hr/in. die. Actual film properties
may vary depending on operating conditions and additive packages. Film properties are not intended to be used as specifications.
Base density is estimated using the assumption that every 1000 ppm of antiblock in the finished product raises the density of the polymer by 0.0006
g/cm3. Base density is the estimated density of the polymer if it did not contain any antiblock.

Published 11/1/2019