Alathon L5005 Polietileno LyondellBasell

Nombre del producto: PE – HDPE – MFI7.9 – LYONDELLBASELL – ALATHON 5005
Categoría: Polietileno
Información del manual del producto: Alathon L5005
Technical Data Sheet
Regulatory Status
For regulatory compliance information, see Alathon L5005 Product Stewardship Bulletin (PSB) and Safety Data
Sheet (SDS).
Status
Commercial: Active
Availability
North America
Application
Bags & Pouches; Can Liners; Retail Carryout Bags; Specialty Film
Market
Flexible Packaging
Processing Method
Blown Film
High Molecular Weight High Density Polyethylene
Typical Properties
Nominal
Value
English
Units
Nominal
Value
SI
Units
Test Method
Physical
Melt Flow Rate, (190 °C/2.16 kg)
0.06
g/10 min
0.06
g/10 min
ASTM D1238
Density, (23 °C)
0.949
g/cm³
0.949
g/cm³
ASTM D1505
Film
Dart Drop Impact Strength, F50
340
g
340
g
ASTM D1709
Tensile Strength at Break
MD
12200
psi
84.1
MPa
ASTM D882
TD
8300
psi
57.2
MPa
ASTM D882
Tensile Strength at Yield
MD
5000
psi
34.5
MPa
ASTM D882
TD
4200
psi
29.0
MPa
ASTM D882
Tensile Elongation at Break
MD
320
%
320
%
ASTM D882
TD
390
%
390
%
ASTM D882
Secant Modulus
MD
137000
psi
945
MPa
ASTM D882
TD
152000
psi
1050
MPa
ASTM D882
Elmendorf Tear Strength
MD
11
g
11
g
ASTM D1922
TD
76
g
76
g
ASTM D1922
Product Description
Alathon L5005 is a high molecular weight high density copolymer that provides broad bimodal molecular weight
distribution, high stiffness and good heat seal response and strength. L5005 is selected by customers for use in
merchandise bags, grocery sacks, trash can liners, produce bags and roll stock.
Page 1 of 2
LyondellBasell
Technical Data Sheet
Date: 2/25/2019
Alathon L5005
Recipient Tracking #:
Request #: 1760584
Notes
Film data obtained from sample produced on an Alpine 200 mm line equipped with a three layer die (40/35/25),
three extruders (65 mm/75 mm/50 mm), internal bubble cooling, die gap of 1.5 mm, neck height of 8 x DD, blow
up ratio of 4:1, film thickness of 0.8 mil and operating at 500 lbs/hr.
These are typical property values not to be construed as specification limits.
Processing Techniques
Specific recommendations for resin type and processing conditions can only be made when the end use,
required properties and fabrication equipment are known.
Company Information
For further information regarding the LyondellBasell company, please visit http://www.lyb.com/.
© LyondellBasell Industries Holdings, B.V. 2018
Disclaimer
Information in this document is accurate to the best of our knowledge at the date of publication. The document
is designed to provide users general information for safe handling, use, processing, storage, transportation,
disposal and release and does not constitute any warranty or quality specification, either express or implied,
including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether
the product is suitable for their use and can be used safely and legally.
In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or
restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell
representative.
Trademarks
The Trademark referenced within the product name is owned or used by the LyondellBasell family of
companies.
Page 2 of 2
LyondellBasell
Technical Data Sheet
Date: 2/25/2019
Alathon L5005
Recipient Tracking #:
Request #: 1760584