Polietileno HDPE 5520 LyondellBasell

Nombre del producto: PE – HDPE – MFI20 – LYONDELLBASELL – H5520
Categoría: Polietileno
Información del manual del producto: Alathon H5520
Technical Data Sheet
Regulatory Status
For regulatory compliance information, see Alathon H5520 Product Stewardship Bulletin (PSB) and Safety Data
Sheet (SDS).
Status
Commercial: Active
Availability
North America
Application
Caps & Closures; Containers; Housewares
Market
Rigid Packaging
Processing Method
Injection Molding
High Density Polyethylene
Typical Properties
Nominal
Value
English
Units
Nominal
Value
SI
Units
Test Method
Physical
Melt Flow Rate, (190 °C/2.16 kg)
20
g/10 min
20
g/10 min
ASTM D1238
Density, (23 °C)
0.955
g/cm³
0.955
g/cm³
ASTM D1505
Bulk Density
37-39
lb/ft³
593-625
kg/m³
ASTM D1895
Spiral Flow
14.8
in
37.6
cm
LYB Method
Mechanical
Flexural Modulus
(1% Secant)
167000
psi
1150
MPa
ASTM D790
(2% Secant)
140000
psi
965
MPa
ASTM D790
Flexural Young’s Modulus
181000
psi
1250
MPa
ASTM D790
Tensile Modulus, (1% Secant)
108000
psi
745
MPa
ASTM D638
Tensile Young’s Modulus
124000
psi
855
MPa
ASTM D638
Tensile Stress at Break, (23 °C)
3920
psi
27
MPa
ASTM D638
Tensile Elongation at Break, (23 °C)
9
%
9
%
ASTM D638
Impact
Notched Izod Impact Strength, (23 °C)
0.55
ft-lb/in
29
J/m
ASTM D256
Unnotched Impact Strength, (-18 °C)
14
ft-lb/in
750
J/m
ASTM D4812
Hardness
Shore Hardness, (Shore D, max)
70
70
ASTM D2240
Thermal
Vicat Softening Temperature
257
°F
125
°C
ASTM D1525
Low Temperature Brittleness, F೦ೡ
-4
°F
-20
°C
ASTM D746
Deflection Temperature Under Load, (66 psi,
Unannealed)
162
°F
72
°C
ASTM D648
Melting Temperature
268.2
°F
129
°C
ASTM D3418
Product Description
Alathon H5520 provides good processing characteristics and exhibits excellent toughness and color as well as
low odor and good molded-part stability. Typical applications include housewares, caps, closures and various
food containers.
Page 1 of 4
LyondellBasell
Technical Data Sheet
Date: 7/25/2017
Alathon H5520
Recipient Tracking #:
Request #: 907620
Notes
Conditions of Tensile Stress and Elongation values are: 50 mm/min, Type IV specimen.
Conditions of Flexural Modulus values are: 0.5 inches/min or 12.5 mm/min.
Conditions of Tensile Modulus values are: 50 mm/min, Type I Specimen.
Spiral Flow measures the number of inches of flow produced when molten resin is injected into a long, spiral
channel (0.0625″ insert), at a constant injection pressure of 1000 psi with a melt temperature of 440 °F.
Deflection Temperature Under Load and Low Temperature Brittleness data are for control and development
work and are not intended for use in design or predicting performance at elevated or sub-ambient temperatures.
These are typical property values not to be construed as specification limits.
Processing Techniques
Specific recommendations for resin type and processing conditions can only be made when the end use,
required properties and fabrication equipment are known.
Company Information
For further information regarding the LyondellBasell company, please visit http://www.lyb.com/.
© LyondellBasell Industries Holdings, B.V. 2017
Crystallization Temperature
241.0
°F
115
°C
ASTM D3418
Page 2 of 4
LyondellBasell
Technical Data Sheet
Date: 7/25/2017
Alathon H5520
Recipient Tracking #:
Request #: 907620
Disclaimer
Before using a product sold by a company of the LyondellBasell family of companies, users should make their
own independent determination that the product is suitable for the intended use and can be used safely and
legally.
SELLER MAKES NO WARRANTY; EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY) OTHER THAN
AS SEPARATELY AGREED TO BY THE PARTIES IN A CONTRACT.
Users should review the applicable Safety Data Sheet before handling the product.
This product(s) may not be used in the manufacture of any of the following, without prior written approval by
Seller for each specific product and application:
(i) U.S. FDA Class I or II Medical Devices; Health Canada Class I, II or III Medical Devices; European Union
Class I or II Medical Devices;
(ii) film, overwrap and/or product packaging that is considered a part or component of one of the
aforementioned medical devices;
(iii) packaging in direct contact with a pharmaceutical active ingredient and/or dosage form that is intended for
inhalation, injection, intravenous, nasal, ophthalmic (eye), digestive, or topical (skin) administration;
(iv) tobacco related products and applications, electronic cigarettes and similar devices.
(v) safety components in automotive applications, for example: air bags, air bag unit housings and covers,
seat belt mechanisms, brake systems, pedals and pedal supports, steering systems.
The product(s) may not be used in:
(i) U.S. FDA Class III Medical Devices; Health Canada Class IV Medical Devices; European Class III Medical
Devices;
(ii) applications involving permanent implantation into the body;
(iii) life-sustaining medical applications.
All references to U.S. FDA, Health Canada, and European Union regulations include another country’s
equivalent regulatory classification.
In addition to the above, LyondellBasell may further prohibit or restrict the use of its products in certain
applications. For further information, please contact a LyondellBasell representative.
Trademarks
Adflex, Adstif, Adsyl, Akoafloor, Akoalit, Alastian, Alathon, Alkylate, Amazing Chemistry, Aquamarine,
Aquathene, Avant, Catalloy, Clyrell, CRP, Crystex, Dexflex, Duopac, Duoprime, Explore & Experiment, Filmex,
Flexathene, Fueling the power to win, Glacido, Hifax, Hiflex, Histif, Hostacom, Hostalen, Hyperzone, Ideal,
Indure, Integrate, Koattro, LIPP, Lucalen, Luflexen, Lupolen, Luposim, Lupostress, Lupotech, Metocene,
Microthene, Moplen, MPDIOL, Nerolex, Nexprene, Petrothene, Plexar, Polymeg, Pristene, Prodflex, Pro-fax,
Punctilious, Purell, Refax, SAA100, SAA101, Sequel, Softell, Spherilene, Spheripol, Spherizone, Starflex,
Stretchene, Superflex, TBAc , Tebol, T-Hydro, Toppyl, Trans4m, Tufflo, Ultrathene, Vacido and Valtec are
trademarks owned and/or used by the LyondellBasell family of companies.
Adsyl, Akoafloor, Akoalit, Alastian, Alathon, Aquamarine, Avant, CRP, Crystex, Dexflex, Duopac, Duoprime,
Explore & Experiment, Filmex, Flexathene, Hifax, Hostacom, Hostalen, Ideal, Integrate, Koattro, Lucalen,
Lupolen, Metocene, Microthene, Moplen, MPDIOL, Nexprene, Petrothene, Plexar, Polymeg, Pristene, Pro-fax,
Punctilious, Purell, Sequel, Softell, Spheripol, Spherizone, Starflex, Tebol, T-Hydro, Toppyl, Tufflo and
Ultrathene are registered in the U.S. Patent and Trademark Office.
Page 3 of 4
LyondellBasell
Technical Data Sheet
Date: 7/25/2017
Alathon H5520
Recipient Tracking #:
Request #: 907620
Page 4 of 4
LyondellBasell
Technical Data Sheet
Date: 7/25/2017
Alathon H5520
Recipient Tracking #:
Request #: 907620