PP – IMPACTO – MFI1.5 – FORMOSA

Nombre del producto: PP – IMPACTO – MFI1.5 – FORMOSA – 6502A
Categoría: Polipropileno
Información del manual del producto: 10/15
Formolene® 6502A

Impact Copolymer for Extrusion Applications

Formolene® 6502A is a high impact copolymer with an excellent balance of toughness and stiffness. It is
suitable for blow-molded bottles and components, heavy gauge sheet for thermoformed containers and
components and profile extrusions including corrugated board.

Material has been approved under automotive specification – FCA MS-DB-500 CPN 4809.

Formolene® 6502A meets the requirements of the U.S. Food and Drug Administration as specified in 21
CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food
contact. For additional information on approved conditions of use for food contact applications, please refer
to the “Products” section on our website (http://www.fpcusa.com/ourproducts.html).

This material is free of animal-derived content.

Typical Properties of this Commercial Grade

Typical Values
Property
Test Method
English
SI
Melt Flow Rate, I2 @ 230°C
ASTM D1238
1.5 g/10min
1.5 g/10min
Density
ASTM D1505
0.9 g/cm3
0.9 g/cm3
Tensile Strength at Yield (50
mm/min)
ASTM D638
3,800 psi
26 MPa
Elongation at Yield (50 mm/min)
ASTM D638
9 %
9 %
Flexural Modulus (1.3 mm/min),
1% Secant
ASTM D790
175,000 psi
1207 MPa
Rockwell Hardness
ASTM D785
95 R Scale
95 R Scale
Notched Izod Impact Strength @
73°F
ASTM D256A
16 ft-lb/in
854 J/m
Notched Izod Impact Strength @
32°F
ASTM D256A
1.7 ft-lb/in
91 J/m
Heat Deflection Temperature @ 66
psi
ASTM D648
203 °F
97 °C
Notes: Specimens were injection molded according to the conditions specified in ASTM D4101. Data for representative
purposes only; not to be construed as product specification. Published 4/03, Revised 3/18