Polietileno HDB0763 Braskem

Nombre del producto: PE – HDPE – MFI0.72 – BRASKEM – HDB0763
Categoría: Polietileno
Información del manual del producto: (July, 2022)
Datasheet
Applica ons:
Milk packaging, Water bo les, Juice packaging, Liquid food packaging
Processes:
Extrusion Blow Molding
Control Proper es:
Feature
Method
Units
Values
Melt Flow Rate (190°C/2.16kg)
ASTMD 1238
g/10 min
0.720
Density
ASTMD 792
g/cm³
0.960
Typical Proper es1
Feature
Method
Units
Values
Tensile Strength at Yield
ASTM D 638
MPa
30
Tensile Strength at Break
ASTM D 638
MPa
20
Strain at Yield
ASTM D 638
%
6
Strain at Break
ASTM D 638
%
510
Elas city Modulus (Secant 1%)
ASTM D 638
MPa
1475
Flexural Modulus (Secant 1%)
ASTM D 790
MPa
1480
Izod Impact Strength3
ASTM D 256/A
J/m
100
Heat Deflec on Temperature (0.455 MPa)
ASTM D 648
°C
75
Vicat So ening Point (10 N)
ASTM D 1525
°C
130
ESCR (100% Igepal)2
ASTM D 1693
h
10
1 Test specimens from compression molded plaque according to ASTM D4703.
2 Condi on B.
3 Test temperature at 23°C.
Final Remarks
1. 
Read Safety Data Sheet before use.
2. 
The informa on in this document is provided in good faith an reflects typical values obtained in our laboratories and should
not be considered as absolute nor warranted. Only the proper es and values men oned on the Cer ficate of Quality are
considered as product warranty.
3. 
In some aplica ons, Braskem IDESA has developed resins well‐tailored to meet specific requirements.
4. 
In case of doubts regarding u liza on, or for other applica ons, please contact Braskem IDESA technical services
[email protected].
5. 
The values reported in this document may change without Braskem IDESA previous communica on.
6. 
Braskem IDESA does not recommended the use of this product for the manufacture of packages, parts or any other used
storage or contact with parenteral solu on nor with the inside of the human body.
7. 
The content of this product data sheet replaces the one issued previously.
8. 
For informa on regarding BPA, please consult the Regulatory Informa on Sheet (RIS).
9. 
For food contact informa on, including U.S. Food ans Drugs Adminsitra os (FDA) compliance, please refer to Regulatory
Informa on Sheet (RIS) available at www.braskemidesa.com.
10. 
For product stewardship and product satefy informa on, please contact Braskem IDESA at [email protected].
High Density Polyethylene HDB0763
Descrip on:
HDB0763 is a high density polyethylene homopolymer, designed for blow molding of food
packaging. It exhibits excellent processing proper es and extremely low odor transfer in finished
goods.