OTR MFI4 SABIC

Nombre del producto: OTR – MFI4 – SABIC – PPE+PS LTA6020
Categoría: Otros
Información del manual del producto: © 2023 Copyright by SABIC. All rights reserved

NORYL™ RESIN LTA6020
REGION AMERICAS

DESCRIPTION
NORYL LTA6020 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated,
non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm, 5VB at 2mm, and V0 at 1.5mm along with a UL746C Outdoor
Suitability rating of F1. NORYL LTA6020 exhibits good dimensional stability over a wide temperature range, high heat performance, low moisture uptake,
and offers long-term aging / retention of mechanical properties. It is an excellent candidate for solar / photovoltaic (PV) junction boxes and outdoor
electrical enclosures.

Features
Flame Retardant, Hydrolytic Stability, Low Warpage, Amorphous, Low Shrinkage, Low Moisture Absorption,
Low Specific Gravity, Non Cl/Br flame retardant, Non halogenated flame retardant, Dimensional stability

Fillers
Unreinforced
Polymer Types
Polyphenylene Ether + PS (PPE+PS)

Processing Techniques
Injection Molding

INDUSTRY
SUB INDUSTRY
Building and Construction
Building Component
Electrical and Electronics
Energy Management, Electronic Components
Industrial
Electrical

TYPICAL PROPERTY VALUES

Revision 20230615

PROPERTIES
TYPICAL VALUES
UNITS
TEST METHODS
MECHANICAL
(1)

Tensile Stress, yld, Type I, 50 mm/min
72
MPa
ASTM D638
Tensile Strain, yld, Type I, 50 mm/min
6
%
ASTM D638
Flexural Stress, yld, 2.6 mm/min, 100 mm span
105
MPa
ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span
2580
MPa
ASTM D790
Tensile Stress, yield, 50 mm/min
71
MPa
ISO 527
Tensile Stress, break, 50 mm/min
57
MPa
ISO 527
Tensile Strain, yield, 50 mm/min
4
%
ISO 527
Tensile Strain, break, 50 mm/min
8
%
ISO 527
Tensile Modulus, 1 mm/min
2680
MPa
ISO 527
Flexural Stress, yield, 2 mm/min
105
MPa
ISO 178
Flexural Modulus, 2 mm/min
2600
MPa
ISO 178
IMPACT
(1)

Charpy Impact, unnotched, 23°C
18
kJ/m²
ISO 179/2C
Izod Impact, notched, 23°C
220
J/m
ASTM D256
Izod Impact, notched 80*10*4 +23°C
16
kJ/m²
ISO 180/1A
Izod Impact, notched 80*10*4 0°C
12
kJ/m²
ISO 180/1A
Izod Impact, notched 80*10*4 -10°C
11
kJ/m²
ISO 180/1A
Izod Impact, notched 80*10*4 -20°C
10
kJ/m²
ISO 180/1A
GENERAL INFORMATION
© 2023 Copyright by SABIC. All rights reserved

PROPERTIES
TYPICAL VALUES
UNITS
TEST METHODS
Izod Impact, notched 80*10*4 -30°C
8
kJ/m²
ISO 180/1A
Izod Impact, notched 80*10*4 -40°C
8
kJ/m²
ISO 180/1A
THERMAL
(1)

HDT, 1.82 MPa, 6.4 mm, unannealed
126
°C
ASTM D648
CTE, -40°C to 40°C, flow
8.E-05
1/°C
ISO 11359-2
CTE, -40°C to 40°C, xflow
8.E-05
1/°C
ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C
125
–
IEC 60695-10-2
Ball Pressure Test, approximate maximum
135
°C
IEC 60695-10-2
Vicat Softening Temp, Rate A/120
155
°C
ISO 306
Vicat Softening Temp, Rate B/120
144
°C
ISO 306
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm
136
°C
ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm
123
°C
ISO 75/Af
Relative Temp Index, Elec
(2)

125
°C
UL 746B
Relative Temp Index, Mech w/impact
(2)

125
°C
UL 746B
Relative Temp Index, Mech w/o impact
(2)

125
°C
UL 746B
PHYSICAL
(1)

Specific Gravity
1.13
–
ASTM D792
Melt Flow Rate, 250°C/10.0 kgf
4
g/10 min
ASTM D1238
Density
1.13
g/cm³
ISO 1183
Melt Volume Rate, MVR at 280°C/5.0 kg
8
cm³/10 min
ISO 1133
Melt Volume Rate, MVR at 300°C/5.0 kg
20
cm³/10 min
ISO 1133
ELECTRICAL
(1)

Comparative Tracking Index (UL) {PLC}
2
PLC Code
UL 746A
High Amp Arc Ignition (HAI), PLC 1
≥1
mm
UL 746A
Hot-Wire Ignition (HWI), PLC 0
≥1
mm
UL 746A
High Voltage Arc Track Rate {PLC}
4
PLC Code
UL 746A
FLAME CHARACTERISTICS
(2)

UL Yellow Card Link
E45329-100960629
–
–
UL Recognized, 94-5VA Flame Class Rating
≥2.5
mm
UL 94
UL Recognized, 94-5VB Flame Class Rating
≥2
mm
UL 94
UL Recognized, 94V-0 Flame Class Rating
≥1.5
mm
UL 94
UL Recognized, 94V-1 Flame Class Rating
≥1
mm
UL 94
Glow Wire Flammability Index, 1.0 mm
960
°C
IEC 60695-2-12
Glow Wire Flammability Index, 1.5 mm
960
°C
IEC 60695-2-12
Glow Wire Flammability Index, 2.0 mm
960
°C
IEC 60695-2-12
Glow Wire Flammability Index, 3.0 mm
960
°C
IEC 60695-2-12
Glow Wire Flammability Index 960°C, passes at
1
mm
IEC 60695-2-12
Glow Wire Ignitability Temperature, 1.0 mm
825
°C
IEC 60695-2-13
Glow Wire Ignitability Temperature, 1.5 mm
825
°C
IEC 60695-2-13
Glow Wire Ignitability Temperature, 2.0 mm
825
°C
IEC 60695-2-13
Glow Wire Ignitability Temperature, 3.0 mm
825
°C
IEC 60695-2-13
UV-light, water exposure/immersion
F1
–
UL 746C
INJECTION MOLDING
(3)

Drying Temperature
105
°C
Drying Time
3 – 4
Hrs
© 2023 Copyright by SABIC. All rights reserved

PROPERTIES
TYPICAL VALUES
UNITS
TEST METHODS
Maximum Moisture Content
0.02
%
Melt Temperature
280 – 300
°C
Front – Zone 3 Temperature
270 – 290
°C
Middle – Zone 2 Temperature
280 – 300
°C
Rear – Zone 1 Temperature
260 – 280
°C
Hopper Temperature
60 – 80
°C
Mold Temperature
80 – 100
°C

(1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
(2) UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
(3) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall
molding and gas-assist molding.

MORE INFORMATION
For curve data and CAE cards, please visit and register at https://materialfinder.sabic-specialties.com

DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller
materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is
intended, or should be construed, to grant any license under any patent or other intellectual property right.