SANTOPRENE TPV-201-80 Celanese

Nombre del producto: TPE – – SANTOPRENE – TPV-201-80
Categoría: Elastómero Termoplástico
Información del manual del producto: SANTOPRENE® 201-80
A soft, colorable, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material
combines good physical properties and chemical resistance for use in a wide range of applications. This grade of
Santoprene® TPV is shear-dependent and can be processed on conventional thermoplastics equipment for injection
molding, extrusion, blow molding, thermoforming or vacuum forming. It is polyolefin based and recyclable within the
manufacturing stream.

Key Features
· UL listed: file #QMFZ2.E80017, Plastics – Component; file #QMFZ8.E80017, Plastics Certified For Canada – Component.
· Recommended for applications requiring excellent flex fatigue resistance.
· Excellent ozone resistance.
Typical mechanical properties
Stress at 100% elongation
4.7 MPa
ISO 527-1/-2 or ISO 37
Stress at break
11.1 MPa
ISO 527-1/-2 or ISO 37
Elongation at break
540 %
ISO 527-1/-2 or ISO 37
Brittleness temperature
-60 °C
ISO 974
Brittleness Temperature
-60 °C
ASTM D 746
Shore A hardness, 15s
86
ISO 48-4 / ISO 868
Shore A hardness change, after ageing
5
ISO 48-4 / ISO 868
Compression set at 70°C, 24h
41 %
ISO 815
Compression Set, 125°C, 70h
47 %
ISO 815
Tear strength, normal
35 kN/m
ISO 34-1
Thermal properties
RTI, electrical, 1.5mm
100 °C
UL 746B
RTI, strength, 1.5mm
95 °C
UL 746B
RTI, strength, 3mm
100 °C
UL 746B
Specific Application Suitability
Continuous Upper Temperature Resistance, 1000h
135 °C
SAE J2236
Detergent resistance
f3
UL 749
Detergent resistance
f4
UL 2157
Flammability
Burning Behav. at thickness h
HB class
UL 94
Thickness tested
3 mm
UL 94
UL recognition
yes
UL 94
Hot Wire Ignition, 1mm
PLC 4 s
UL 746A
Hot Wire Ignition, 1.5mm
PLC 3 s
UL 746A
Hot Wire Ignition, 3mm
PLC 2 s
UL 746A
Printed: 2023-08-30
Page: 1 of 3
Revised: 2023-06-27
Source: Celanese Materials Database
SANTOPRENE® 201-80
Electrical properties
Comparative tracking index
PLC 0 PLC
UL 746A
Arc Resistance Performance Level Category
PLC 6 class
UL 746B
Electric Strength, Short Time, 2mm
32 kV/mm
ASTM D 149
High Amperage Arc Ignition Category, 1.5 mm
PLC 0 class
UL 746A
High Voltage Arc Tracking Rate
PLC 1 mm/min
UL 746A
Other properties
Density
960 kg/m³
ISO 1183
Injection
Drying Temperature
82 °C
Drying Time, Dehumidified Dryer
3 h
Processing Moisture Content
0.08 %
Max. regrind level
20 %
Max. mould temperature
10 – 52 °C
Vent depth
25 µm
Back pressure
0.345 – 0.689 MPa
Injection speed
fast
Extrusion
Drying Temperature
82 °C
Drying Time, Dehumidified Dryer
3 h
Melt Temperature Range
202 °C
Processing Texts
Processing Notes
Desiccant drying for 3 hours at 80°C (180°F) is recommended.
Santoprene® TPV has a wide temperature processing window from 175 to
230°C (350 to 450°F) and is incompatible with acetal and PVC.
Other Approvals
Other Approvals
OEM
Specification
Additional Information
Stellantis – Chrysler
MS-AR-100 DGN

Ford
WSD-M2D381-A1

Stellantis – FCA Group
55248/02
EMP-90
Printed: 2023-08-30
Page: 2 of 3
Revised: 2023-06-27
Source: Celanese Materials Database
SANTOPRENE® 201-80
Powered by TCPDF (www.tcpdf.org)
Printed: 2023-08-30
Page: 3 of 3
Revised: 2023-06-27
Source: Celanese Materials Database
NOTICE TO USERS: Values shown are based on testing of laboratory test specimens and represent data that fall within the standard range of properties for natural material. These values alone do
not represent a sufficient basis for any part design and are not intended for use in establishing maximum, minimum, or ranges of values for specification purposes. Colourants or other additives may
cause significant variations in data values. Properties of moulded parts can be influenced by a wide variety of factors including, but not limited to, material selection, additives, part design,
processing conditions and environmental exposure. Other than those products expressly identified as medical grade (including by MT® product designation or otherwise), Celanese’s products are
not intended for use in medical or dental implants. Regardless of any such product designation, any determination of the suitability of a particular material and part design for any use contemplated
by the users and the manner of such use is the sole responsibility of the users, who must assure themselves that the material as subsequently processed meets the needs of their particular product
or use. To the best of our knowledge, the information contained in this publication is accurate; however, we do not assume any liability whatsoever for the accuracy and completeness of such
information. The information contained in this publication should not be construed as a promise or guarantee of specific properties of our products. It is the sole responsibility of the users to
investigate whether any existing patents are infringed by the use of the materials mentioned in this publication. Moreover, there is a need to reduce human exposure to many materials to the lowest
practical limits in view of possible adverse effects. To the extent that any hazards may have been mentioned in this publication, we neither suggest nor guarantee that such hazards are the only ones
that exist. We recommend that persons intending to rely on any recommendation or to use any equipment, processing technique or material mentioned in this publication should satisfy themselves
that they can meet all applicable safety and health standards. We strongly recommend that users seek and adhere to the manufacturer’s current instructions for handling each material they use, and
entrust the handling of such material to adequately trained personnel only. Please call the telephone numbers listed for additional technical information. Call Customer Services for the appropriate
Materials Safety Data Sheets (MSDS) before attempting to process our products.
© 2023 Celanese or its affiliates. All rights reserved. Celanese®, registered C-ball design and all other trademarks identified herein with ®, TM, SM, unless otherwise noted, are trademarks of
Celanese or its affiliates. Fortron is a registered trademark of Fortron Industries LLC. KEPITAL is a registered trademark of Korea Engineering Plastics Company, Ltd.