Polietileno Copolímero B5335H INEOS

Nombre del producto: PE – HDPE – MFI0.35 – INEOS – B5335H
Categoría: Polietileno
Información del manual del producto: Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient’s sole risk. As conditions of use may vary and are
beyond the control of INEOS Olefins & Polymers USA, no representations or warranty, express or implied, are made with respect to the accuracy, reliability, or completeness
of this information. This information in no way modifies, amends, enlarges, or creates any specification or warranty, and ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
EXCLUDED. INEOS Olefins & Polymers USA shall not be responsible for any damage or injury resulting from abnormal use, from any failure to follow appropriate
practices, or from hazards inherent in the nature of the product and/or material, nor for toxicological effects or Industrial Hygiene associated with particular use of any product
described herein. This information relates only to the specific product and/or material designated and may not be valid for such product and/or material used in combination
with any other product and/or material or in any process, unless otherwise specified. This information shall not be construed as a recommendation for any use that may
infringe any patent, trademark, or the like, or as an endorsement of any material, equipment, service, or other item not supplied by INEOS Olefins & Polymers USA.
The name and logo INEOS are trademarks of the INEOS Group and its affiliated companies and businesses.

2600 South Shore Boulevard, Ste. 500
League City, TX 77573
Tel: 281-535-6600
www.ineos-op.com

B53-35H-011 Polyethylene Copolymer
B53-35H-011 is a high density polyethylene copolymer developed for blow molding
applications. This product is recommended for use in applications which require a
combination of high top load strength and good environmental stress crack resistance
(ESCR). This material meets the Food and Drug Administration requirements of 21CFR
177.1520.

Typical Properties1

Values
ASTM

English Units
SI Units
Method

Resin
Density
__
0.955 g/cc
D4883
Melt Index 190°C/2.16 kg
__
0.35 g/10 min
D1238

Compression Molded Samples
Tensile Strength (2 in/min)

D638
@ Yield
4,000 psi
27 MPa

@ Break
2,500 psi
17 MPa
Elongation (2 in/min)

D638
@ Yield
9%
9%
@ Break
>600%
>600%

Flexural Modulus

D790A
Tangent Method
210,000 psi
1450 MPa
2% Secant Method
150,000 psi
1035 MPa
Notched Izod Impact Strength
3.2 ft-lbf/in
16 kJ/m2
D256
Hardness (Shore D)
64
64
D2240
Vicat Softening Point
261 F
127 C
D1525
Brittleness Temperature
<-103 F <-75 C D746 Heat Deflection Temperature D648 @ 66 psi (455 kPa) 167 F 75 C @ 264 psi (1,820 kPa) 118 F 48 C Environmental Stress Crack Resistance D1693 Condition B, 100% Igepal F50 (hrs.) 30 30 1 Properties will vary and are not to be used for specification purposes. Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient’s sole risk. As conditions of use may vary and are beyond the control of INEOS Olefins & Polymers USA, no representations or warranty, express or implied, are made with respect to the accuracy, reliability, or completeness of this information. This information in no way modifies, amends, enlarges, or creates any specification or warranty, and ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED. INEOS Olefins & Polymers USA shall not be responsible for any damage or injury resulting from abnormal use, from any failure to follow appropriate practices, or from hazards inherent in the nature of the product and/or material, nor for toxicological effects or Industrial Hygiene associated with particular use of any product described herein. This information relates only to the specific product and/or material designated and may not be valid for such product and/or material used in combination with any other product and/or material or in any process, unless otherwise specified. This information shall not be construed as a recommendation for any use that may infringe any patent, trademark, or the like, or as an endorsement of any material, equipment, service, or other item not supplied by INEOS Olefins & Polymers USA. The name and logo INEOS are trademarks of the INEOS Group and its affiliated companies and businesses. 2600 South Shore Boulevard, Ste. 500 League City, TX 77573 Tel: 281-535-6600 www.ineos-op.com B53-35H-011 Polyethylene Copolymer Regulatory Information The product and uses described herein may require global product registrations and notifications for chemical inventory listings, or for use in food contact or medical devices. For further information, call + 1-800-527-5419. Health and Safety Information The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.ineos-op.com. Before using any material, a customer is advised to consult the MSDS for the product under consideration for use. The Material Safety Data Sheet for this product contains shipping descriptions and should be consulted, before transportation, as a reference in determining the proper shipping description. If the material shipped by INEOS is altered or modified, different shipping descriptions may apply and the MSDS of the original material should not be used. For additional information, samples, pricing and availability, please contact: INEOS Olefins & Polymers, USA Marina View Building 2600 South Shore Boulevard Suite 500 League City, Texas 77573 Phone: +1 281 535 6600 Fax: +1 281 535 6764 Customer Service: +1 800 527 5419 Tech Service: +1 800 338 0489 www.ineos-op.com