Polietileno LLDPE GA574189 LyondellBasell

Nombre del producto: PE – LLDPE – MFI50 – LYONDELLBASELL – PETROTHENE GA574189
Categoría: Polietileno
Información del manual del producto: Petrothene GA574189
Technical Data Sheet
Regulatory Status
For regulatory compliance information, see Petrothene GA574189 Product Stewardship Bulletin (PSB) and
Safety Data Sheet (SDS).
Status
Commercial: Active
Availability
North America
Application
Caps & Closures; Containers; Housewares; Lids; Outdoor and Power Tools
Market
Rigid Packaging
Processing Method
Injection Molding
Linear Low Density Polyethylene
Typical Properties
Nominal
Value
English
Units
Nominal
Value
SI
Units
Test Method
Physical
Melt Flow Rate, (190 °C/2.16 kg)
50
g/10 min
50
g/10 min
ASTM D1238
Density, (23 °C)
0.926
g/cm³
0.926
g/cm³
ASTM D1505
Spiral Flow
17.9
in
45.4
cm
LYB Method
Mechanical
Flexural Modulus
(1% Secant)
70000
psi
480
MPa
ASTM D790
(2% Secant)
61000
psi
420
MPa
ASTM D790
Tensile Strength at Break, (23 °C)
1300
psi
9
MPa
ASTM D638
Tensile Strength at Yield, (23 °C)
2200
psi
15
MPa
ASTM D638
Tensile Elongation at Yield, (23 °C)
11
%
11
%
ASTM D638
Hardness
Shore Hardness, (Shore D)
60
60
ASTM D2240
Thermal
Vicat Softening Temperature
184
°F
84
°C
ASTM D1525
Low Temperature Brittleness, Fཥའ
-98
°F
-72
°C
ASTM D746
Deflection Temperature Under Load, (66 psi,
Unannealed)
117
°F
47
°C
ASTM D648
Product Description
Petrothene GA574189 exhibits excellent flow and impact with good stiffness. Typical applications include lids,
closures, containers, housewares and medical items.
Page 1 of 2
LyondellBasell
Technical Data Sheet
Date: 5/25/2023
Petrothene GA574189
Recipient Tracking #:
Request #: 4388669
Notes
Tensile properties were run with a crosshead speed of 20 inches/min or 500 mm/min.
Flexural Modulus properties were run with a crosshead speed of 0.5 inches/min or 12.5 mm/min.
Spiral Flow measures the number of inches of flow produced when molten resin is injected into a long, spiral
channel (0.0625″ insert), at a constant injection pressure of 1000 psi with a melt temperature of 440 °F.
Deflection Temperature Under Load and Low Temperature Brittleness data are for control and development
work and are not intended for use in design or predicting performance at elevated or sub-ambient temperatures.
These are typical property values not to be construed as specification limits.
Processing Techniques
Specific recommendations for resin type and processing conditions can only be made when the end use,
required properties and fabrication equipment are known.
Company Information
For further information regarding the LyondellBasell company, please visit http://www.lyb.com/.
© LyondellBasell Industries Holdings, B.V. 2018
Disclaimer
Information in this document is accurate to the best of our knowledge at the date of publication. The document is
designed to provide users general information for safe handling, use, processing, storage, transportation,
disposal and release and does not constitute any warranty or quality specification, either express or implied,
including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether the
product is suitable for their use and can be used safely and legally.
In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or
restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell
representative.
Trademarks
The Trademark referenced within the product name is owned or used by the LyondellBasell family of companies.
Page 2 of 2
LyondellBasell
Technical Data Sheet
Date: 5/25/2023
Petrothene GA574189
Recipient Tracking #:
Request #: 4388669