PE – LDPE – MFI1.8 – LyondellBasell

Nombre del producto: PE – LDPE – MFI1.8 – LYONDELLBASELL – PETROTHENE NA345013
Categoría: Polietileno
Información del manual del producto: Petrothene NA345013
Technical Data Sheet
Regulatory Status
For regulatory compliance information, see Petrothene NA345013 Product Stewardship Bulletin (PSB) and
Safety Data Sheet (SDS).
Status
Commercial: Active
Availability
North America
Application
Clarity Film
Market
Flexible Packaging
Processing Method
Blown Film; Cast Film
Low Density Polyethylene
Typical Properties
Nominal
Value
English
Units
Nominal
Value
SI
Units
Test Method
Physical
Melt Flow Rate, (190 °C/2.16 kg)
1.8
g/10 min
1.8
g/10 min
ASTM D1238
Base Resin Density, (23 °C)
0.921
g/cm³
0.921
g/cm³
ASTM D1505
Film
Dart Drop Impact Strength, F50
90
g
90
g
ASTM D1709
Tensile Strength at Break
MD
4000
psi
27.6
MPa
ASTM D882
TD
3400
psi
23.4
MPa
ASTM D882
Tensile Strength at Yield
MD
1500
psi
10.3
MPa
ASTM D882
TD
1600
psi
11.0
MPa
ASTM D882
Tensile Elongation at Break
MD
300
%
300
%
ASTM D882
TD
500
%
500
%
ASTM D882
1% Secant Modulus
MD
26000
psi
179
MPa
ASTM D882
TD
30000
psi
207
MPa
ASTM D882
Elmendorf Tear Strength
MD
360
g
360
g
ASTM D1922
TD
200
g
200
g
ASTM D1922
Thermal
Vicat Softening Temperature
212
°F
100
°C
ASTM D1525
Optical
Haze
5.0
%
5.0
%
ASTM D1003
As measured on NA345196 (medium slip, medium antiblock).
Gloss, (45°)
70
70

ASTM D2457
As measured on NA345196 (medium slip, medium antiblock).
Product Description
Petrothene NA345 is a series of homopolymer resins that combine premium clarity with strength and stiffness. In
addition, NA345 exhibits good impact strength on both flat and creased film. NA345 is selected by customers for
textile packaging, light produce, bread bags and other thin packaging films enhanced by clarity and sparkle.
Page 1 of 2
LyondellBasell
Technical Data Sheet
Date: 7/10/2024
Petrothene NA345013
Recipient Tracking #:
Request #: 5110945
Notes
Film data obtained from sample produced on a 3 1/2″ (89mm) blown film line, commercially available 8″ (203
mm) die, 375°F (191°C) melt extrusion temperature, 2:1 BUR, 1.25 mil (32 micron) gauge, 0.025″ die gap at 130
lbs/hr.
These are typical property values not to be construed as specification limits.
Processing Techniques
Specific recommendations for resin type and processing conditions can only be made when the end use,
required properties and fabrication equipment are known.
Company Information
For further information regarding the LyondellBasell company, please visit http://www.lyb.com/.
© LyondellBasell Industries Holdings, B.V. 2018
Disclaimer
Information in this document is accurate to the best of our knowledge at the date of publication. The document is
designed to provide users general information for safe handling, use, processing, storage, transportation,
disposal and release and does not constitute any warranty or quality specification, either express or implied,
including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether the
product is suitable for their use and can be used safely and legally.
In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or
restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell
representative.
Trademarks
The Trademark referenced within the product name is owned or used by the LyondellBasell family of companies.
Product
Slip(ppm)
Antiblock
(ppm)
NA345013
None
None
NA345184
None
1500
NA345196
750
1500
Additive
Slip
None
None
LYB Method
Antiblock
None
None
LYB Method
Page 2 of 2
LyondellBasell
Technical Data Sheet
Date: 7/10/2024
Petrothene NA345013
Recipient Tracking #:
Request #: 5110945