Polipropileno Homopolímero 4100P Formosa

Nombre del producto: PP – HOPP – MFI20 – FORMOSA – 4100P
Categoría: Polipropileno
Información del manual del producto: 10/15
Formolene® 4100P

Homopolymer for General Purpose Injection Molding

Formolene® 4100P is a polypropylene homopolymer designed for general purpose injection molding
applications including closures, small appliances, housewares and toys. It contains a unique combination of
stabilizers, which provides excellent processability with good stiffness, environmental stress crack resistance,
heat performance and minimal odor & taste.

Formolene® 4100P meets the requirements of the U.S. Food and Drug Administration as specified in 21
CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food
contact. For additional information on approved conditions of use for food contact applications, please refer
to the “Products” section on our website (http://www.fpcusa.com/ourproducts.html).

This material is free of animal-derived content.

Typical Properties of this Commercial Grade
Typical Values
Property
Test Method
English
SI
Melt Flow Rate, I2 @ 230°C
ASTM D1238
20 g/10 min
20 g/10 min
Density
ASTM D1505
0.9 g/cm3
0.9 g/cm3
Tensile Strength at Yield (50 mm/min)
ASTM D638
5,100 psi
35 MPa
Elongation at Yield (50 mm/min)
ASTM D638
9 %
9 %
Flexural Modulus (1.3 mm/min), 1%
Secant
ASTM D790
200,000 psi
1371 MPa
Rockwell Hardness
ASTM D785
105 R Scale
105 R Scale
Notched Izod Impact Strength @ 73°F
ASTM D256A
0.4 ft-lb/in
21 J/m
Heat Deflection Temperature @ 66 psi
ASTM D648
212 °F
100 °C
Note: Specimens were injection molded according to the conditions specified in ASTM D4101. Data for representative purposes
only; not to be construed as product specification. Published 9/99, Revised 03/18