PE – HDPE – MFI12 – Chevron Phillips
Nombre del producto: PE – HDPE – MFI12 – CHEVRON PHILLIPS – PRIMATOP 120952
Categoría: Polietileno
Información del manual del producto: PRIMATOP® HDPE 120952
Amco Polymers – High Density Polyethylene
Monday, March 11, 2024
General Information
General
Material Status
• Commercial: Active
Availability
• North America
Features
• Food Contact Acceptable
• Good Toughness
Uses
• Caps
• Closures
• Household Goods
Agency Ratings
• FDA 21 CFR 176.170(c) 1
• FDA 21 CFR 177.1520(c) 3.2a
ASTM & ISO Properties 2
Physical
Nominal Value Unit
Test Method
Density
0.952 g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
12 g/10 min
ASTM D1238
Mechanical
Nominal Value Unit
Test Method
Tensile Strength (Yield)
26.9 MPa
ASTM D638
Tensile Elongation (Break)
900 %
ASTM D638
Flexural Modulus – Tangent 3 (Compression Molded)
1170 MPa
ASTM D790
Thermal
Nominal Value Unit
Test Method
Brittleness Temperature 4
< -75.0 °C
ASTM D746A
Notes
1 use conditions B through H
2 Typical properties: these are not to be construed as specifications.
3 16:1 span:depth
4 Type 1 Spec.
Bamberger Amco Polymers’ Disclaimer Statement: Bamberger Amco Polymers (“BAP”) is not the manufacturer of this Product, and BAP has not tested, designed, altered, or modified the Product in
any way. BAP does not independently test the Product or verify the information provided in this document. The information provided in this document was provided by the manufacturer, and BAP disclaims
any responsibility for a User’s reliance on, and the results of use of, this information. The information included herein is not a BAP warranty of any kind, nor is it intended to be. Users must make their own
representative tests to determine the safety and suitability of the Product for its intended use, and Users assume all risks of Product use, whether the Product is used alone or in combination with other
materials or as a component part of another product. BAP assumes no obligation or liability for any advice furnished or results obtained with respect to the Product, nor for use of the Product in
infringement of any patent. AS SUCH, BAP DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR ANY
PARTICULAR PURPOSE OR USE. The foregoing limitation of remedy and exclusion of liability is reflected in, and is part of, the consideration for the price charged for the Product.
Page: 1 of 1