Homopolímero para Raffia Formolene® 1102KR Formosa Plastics

Nombre del producto: Homopolímero para Raffia, Formolene® 1102KR, 4 g/10 min, 0.9 g/cm3, 5200 psi, 9 %, 220,000 psi, 105 R Scale, 0.7 ft-lb/in
Categoría: Polipropileno
Información del manual del producto: 10/15
Formolene® 1102KR

Homopolymer for Raffia

Formolene® 1102KR is a polypropylene homopolymer designed for raffia application. Its unique
formulation provides excellent low water carryover.

Formolene® 1102KR meets the requirements of the U.S. Food and Drug Administration as specified in
21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct
food contact. For additional information on approved conditions of use for food contact applications,
please refer to the “Products” section on our web site (http://www.fpcusa.com/ourproducts.html).

This material is free of animal-derived content.

Typical Properties of this Commercial Grade
Typical Values
Property
Test Method
English
SI
Melt Flow Rate, I2 @ 230°C
ASTM D1238
4 g/10 min
4 g/10 min
Density
ASTM D1505
0.9 g/cm3
0.9 g/cm3
Tensile Strength at Yield (50 mm/min)
ASTM D638
5200 psi
36 MPa
Elongation at Yield (50 mm/min)
ASTM D638
9 %
9 %
Flexural Modulus (1.3 mm/min), 1%
Secant
ASTM D790
220,000 psi
1517 MPa
Rockwell Hardness
ASTM D785
105 R Scale
105 R Scale
Notched Izod Impact Strength @ 73°F
ASTM D256A
0.7 ft-lb/in
37 J/m
Note: Specimens were injection molded according to the conditions specified in ASTM D4101.
Data for representative purposes only; not to be construed as product specification.
Published 3/99, Revised 03/18