Polipropileno Homopolímero H12-IM Snetor

Nombre del producto: PP – HOPP – MFI12 – SNETOR – H12-IM
Categoría: Polipropileno
Información del manual del producto: www.snetor.com
Disclaimer:
The information on this document is, to our knowledge, true and accurate. Due to operating conditions and intended uses beyond our control, it is the
customer’s responsibility to establish satisfactory performance of this product for the intended application. By providing the information contained herein,
SNETOR,makes no guaranty or warranty,anddoes not assumeany liability withrespect to thecompleteness of such information.
One River Way, Ste 1125 –
Houston, TX, 77056 – USA
Email: [email protected]
Tel : +33 1 49 04 88 88
Email: [email protected]
Technical Data Sheet
www.snetor.com
POLYPROPYLENE HOMOPOLYMER
FOR INJECTION MOLDING
Polypropylene Homopolymer H12-IM is intended for general-purpose injection molding such as
resin furniture, closures, and consumer product applications. The material meets the requirements
of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.
The H12-IM product provides:
–
Excellent color and processing stability;
–
Good flow characteristics;
–
Excellent organoleptic properties .
NOMINAL RESIN PROPERTIES
NOMINAL VALUE
(ENGLISH)
NOMINAL VALUE
(SI)
ASTM TEST
Melt Flow Rate
12 g/10 min
12 g/10 min.
D1238
Density at 23°C
0.908 g/cm3
908 kg/m3
D1505
Shrinkage
0.014 in/in
0.014 mm/mm
D955
Heat Deflection Temperature at 0.455
MPa (66psi)
216°F
102°C
D648
Tensile yield strength, at 51 mm/min
5300 psi
36.5 MPa
D638
Yield elongation, at 51 mm/min
9%
9%
D638
Flexural modulus (1% secant) at 1.27
mm/min
240,000 psi
1654 MPa
D790A
Notched Izod impact strength, at
73°F/23°C
0.54 ft-lb/in
2.8 J/m 3.1 kJ/m2
D256
H12-IM