Polietileno LLDPE MFI2 LyondellBasell

Nombre del producto: PE – LLDPE – MFI2 – LYONDELLBASELL – PETROTHENE GA502022
Categoría: Polietileno
Información del manual del producto: Petrothene GA502022
Technical Data Sheet
Regulatory Status
For regulatory compliance information, see Petrothene GA502022 Product Stewardship Bulletin (PSB) and
Safety Data Sheet (SDS).
Status
Commercial: Active
Availability
North America
Application
Bags & Pouches; Can Liners; Film Wrap; Food Packaging Film; Lamination Film;
Liner Film
Market
Flexible Packaging
Processing Method
Blown Film; Cast Film
Linear Low Density Polyethylene
Typical Properties
Nominal
Value
English
Units
Nominal
Value
SI
Units
Test Method
Physical
Melt Flow Rate, (190 °C/2.16 kg)
2.0
g/10 min
2.0
g/10 min
ASTM D1238
Base Resin Density, (23 °C)
0.918
g/cm³
0.918
g/cm³
ASTM D1505
Product Density, (23 °C)
0.923
g/cm³
0.923
g/cm³
ASTM D1505
Film
Dart Drop Impact Strength, F50
120
g
120
g
ASTM D1709
Tensile Strength at Break
MD
4900
psi
33.8
MPa
ASTM D882
TD
3600
psi
24.8
MPa
ASTM D882
Tensile Elongation at Break
MD
750
%
750
%
ASTM D882
TD
800
%
800
%
ASTM D882
1% Secant Modulus
MD
32000
psi
221
MPa
ASTM D882
TD
36000
psi
248
MPa
ASTM D882
Elmendorf Tear Strength
MD
170
g
170
g
ASTM D1922
TD
400
g
400
g
ASTM D1922
Additive
Slip
1350
ppm
1350
ppm
LYB Method
Antiblock
7000
ppm
7000
ppm
LYB Method
Product Description
The Petrothene GA502 series of resins are pelletized linear low density polyethylenes for applications requiring
excellent drawdown and toughness. These pelletized products offer excellent additive homogeneity, require no
transfer equipment modification and facilitate clean and safe storage and handling. They can be used in either
blown or cast film extrusion.
Page 1 of 2
LyondellBasell
Technical Data Sheet
Date: 3/22/2024
Petrothene GA502022
Recipient Tracking #:
Request #: 4923000
Notes
Film sample used for testing was 1.5 mil gauge, 2.1:1 BUR.
These are typical property values not to be construed as specification limits.
Processing Techniques
Specific recommendations for resin type and processing conditions can only be made when the end use,
required properties and fabrication equipment are known.
Company Information
For further information regarding the LyondellBasell company, please visit http://www.lyb.com/.
© LyondellBasell Industries Holdings, B.V. 2018
Disclaimer
Information in this document is accurate to the best of our knowledge at the date of publication. The document is
designed to provide users general information for safe handling, use, processing, storage, transportation,
disposal and release and does not constitute any warranty or quality specification, either express or implied,
including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether the
product is suitable for their use and can be used safely and legally.
In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or
restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell
representative.
Trademarks
The Trademark referenced within the product name is owned or used by the LyondellBasell family of companies.
Product
Product
Density(g/cm³)
Slip(ppm)
Antiblock
(ppm)
GA502022
0.923
1350
7000
GA502024
0.918
None
None
GA502119
0.918
None
None
Page 2 of 2
LyondellBasell
Technical Data Sheet
Date: 3/22/2024
Petrothene GA502022
Recipient Tracking #:
Request #: 4923000