Polipropileno Formolene 4142N

Nombre del producto: PP – HOPP – MFI12 – FORMOSA – FORMOLENE 4142N
Categoría: Polipropileno
Información del manual del producto: 10/15
Formolene® 4142N

Homopolymer for Injection Molded Applications

Formolene® 4142N is a polypropylene homopolymer with fast cycle time and easy mold release. It has use in
injection molded applications including appliances, closures and thin wall programs. It contains a unique
combination of stabilizers and additives, including nucleation and antistat which provides excellent
processability and good end use performance.

Formolene® 4142N meets the requirements of the U.S. Food and Drug Administration as specified in 21
CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food
contact. For additional information on approved conditions of use for food contact applications, please refer
to the “Products” section on our website (http://www.fpcusa.com/ourproducts.html).

This material is free of animal-derived content.

Typical Properties of this Commercial Grade
Typical Values
Property
Test Method
English
SI
Melt Flow Rate, I2 @ 230°C
ASTM D1238
12 g/10 min
12 g/10 min
Density
ASTM D1505
0.9 g/cm3
0.9 g/cm3
Tensile Strength at Yield (50 mm/min)
ASTM D638
5,700 psi
39 MPa
Elongation at Yield (50 mm/min)
ASTM D638
7 %
7 %
Flexural Modulus (1.3 mm/min), 1%
Secant
ASTM D790
260,000 psi
1793 MPa
Rockwell Hardness
ASTM D785
105 R Scale
105 R Scale
Notched Izod Impact Strength @ 73°F
ASTM D256A
0.8 ft-lb/in
43 J/m
Note: Specimens were injection molded according to the conditions specified in ASTM D4101.
Data for representative purposes only; not to be construed as product specification.
Published 9/99, Revised 3/18