Polipropileno 4720WZ AMCO
Nombre del producto: PP – IMPACTO – MFI25 – AMCO – TOTALENERGIES 4720WZ
Categoría: Polipropileno
Información del manual del producto: TotalEnergies Polypropylene 4720WZ
TotalEnergies – Polypropylene Impact Copolymer
Tuesday, January 23, 2024
www.ulprospector.com
UL LLC ©2024. All rights reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no
responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection
information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within
our control, and we cannot and will not take responsibility for the information or content.
Page: 1 of 2
General Information
Product Description
Polypropylene 4720WZ is a nucleated impact copolymer with a Melt Flow of 25 g/10min.
4720WZ is characterized by improved stiffness, creep resistance, high impact resistance, excellent antistatic properties and has been formulated to
allow faster cycling through early demolding.
4720WZ has been developed specifically for the injection molding of garden furniture, housewares and thin-walled articles.
General
Material Status
• Commercial: Active
Availability
• North America
Additive
• Nucleating Agent
Features
• Antistatic
• Creep Resistant
• Fast Molding Cycle
• Good Stiffness
• High Impact Resistance
• Impact Copolymer
• Nucleated
Uses
• Furniture
• Household Goods
• Lawn and Garden Equipment
• Thin-walled Parts
Forms
• Pellets
Processing Method
• Injection Molding
ASTM & ISO Properties 1
Physical
Nominal Value Unit
Test Method
Density
0.905 g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
25 g/10 min
ASTM D1238
Mechanical
Nominal Value Unit
Test Method
Tensile Strength (Yield)
4060 psi
ASTM D638
Tensile Elongation (Yield)
6.0 %
ASTM D638
Flexural Modulus
210000 psi
ASTM D790
Impact
Nominal Value Unit
Test Method
Charpy Unnotched Impact Strength
DIN 53453
-4°F
2.1 ft·lb/in²
73°F
4.5 ft·lb/in²
Notched Izod Impact
ASTM D256
-4°F
0.90 ft·lb/in
73°F
2.0 ft·lb/in
Thermal
Nominal Value Unit
Test Method
Vicat Softening Temperature
302 °F
ASTM D1525
Melting Temperature
320 to 329 °F
Internal Method
Heat Deflection Temperature
194 °F
ASTM D648
TotalEnergies Polypropylene 4720WZ
TotalEnergies – Polypropylene Impact Copolymer
www.ulprospector.com
UL LLC ©2024. All rights reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no
responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection
information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within
our control, and we cannot and will not take responsibility for the information or content.
Page: 2 of 2
Notes
1 Typical properties: these are not to be construed as specifications.