Polipropileno Homopolímero PP 528K SABIC

Nombre del producto: PP – HOPP – MFI3 – SABIC – PP-528K
Categoría: Polipropileno
Información del manual del producto: Revision 20211105
SABIC® PP 528K
POLYPROPYLENE HOMOPOLYMER FOR THERMOFORMING
DESCRIPTION
SABIC® PP 528K is formulated with an advanced agent and is specially developed for in-line and off-line thermoforming applications.
PP 528K encompasses the following features: high stiffness, good clarity, very good dimensional stability, easy process ability and faster cycling.
TYPICAL APPLICATIONS
SABIC® PP 528K is used for the production of containers mainly for food and health drink products such as cups, trays and lids.
TYPICAL PROPERTY VALUES
PROPERTIES
TYPICAL VALUES
UNITS
TEST METHODS
POLYMER PROPERTIES
Melt Flow Rate (MFR)
at 230°C and 2.16kg
3
g/10 min
ASTM D1238
Density
at 23°C
905
kg/m³
ASTM D792
MECHANICAL PROPERTIES
Tensile Properties
Strength @ Yield
37
MPa
ASTM D638
Elongation @ Yield
10
%
ASTM D638
Flexural Modulus (1% Secant)
1700
MPa
ASTM D790 A
Izod Impact Strength
notched, at 23°C
35
J/m
ASTM D256
Rockwell Hardness, R-Scale
102
–
ASTM D785
THERMAL PROPERTIES
Vicat Softening Temperature
150
°C
ASTM D1525
Heat deflection temperature
at 455kPa
112
°C
ASTM D648
(1) Typical values, not to be construed as specific limits
(2) Based on injection molded specimens
STORAGE AND HANDLING
Polypropylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably
do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell
and inadequate product performance. It is advisable to process PP resin within 6 months after delivery.
DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller
materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is
intended, or should be construed, to grant any license under any patent or other intellectual property right.
(1)
(2)
© 2023 Copyright by SABIC. All rights reserved