Polipropileno Homopolímero PPH 040 AMCO

Nombre del producto: PP – HOPP – MFI4 – AMCO – PRIMATOP 040
Categoría: Polipropileno
Información del manual del producto: PPH 040
Polypropylene Homopolymer
Features
Good end use perfomance
Excellent processability
Applications
Injection molding
Extrusion
Properties
ASTM
Typical Values
Melt Flow Rate, I2@ 230°C, g/10 min.
D 1238
4
Density, g/cm³
D1505
0.9
Tensile Strength @ Yield (50 mm/min), psi
D 638
5,000
Flexural Modulus, 1 % Secant, psi
D 790
235,000
Notched Izod Impact Strength @ 73°F, ft-;lb/in
D 256
0.9
Heat Deflection Temperature, 66 psi, °F
D 648
194
This product meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR177.1520 covering
safe use of polyolefin articles intended for direct food contact.
The technical information, suggested uses, and applications presented, are made without charge and are believed to be reliable; however, the Amco Polymers disclaims
responsibility for reliance on, and results of use of, this information. The data listed herein falls within the nominal range of product properties but should not be used to
establish specification limits or used alone as a basis for design. This information is not intended as a warranty of any kind. Users must make their own representative
test and assume all risks of use, whether the product is used alone or in combination with other materials. Amco Polymers assumes no obligation or liability for any
advice furnished or results obtained with respect to the product, nor for use of the product in infringement of any patent. All warranties, expressed or implied, of
merchantability, AND FITNESS for a particular purpose or use are excluded and disclaimed. The foregoing limitation of remedy and exclusion of liability is reflected in,
and is part of, the consideration for the price charged for the product.
All data displayed herein has been obtained via testing of injected molded specimens of natural color. Pigmentation may affect certain properties to various degrees.