ABS – MFI4 – SABIC – EX39

Nombre del producto: ABS – MFI4 – SABIC – EX39
Categoría: Acrilonitrilo Butadieno Estireno
Información del manual del producto: CYCOLAC™ Resin EX39 – Americas
Acrylonitrile Butadiene Styrene
SABIC
www.ulprospector.com
Technical Data
Product Description
Highest impact extrusion ABS for sheet and blow molding applications.
General
Material Status
• Commercial: Active
UL Yellow Card 1
• E121562-220681
Search for UL Yellow Card
• SABIC
• CYCOLAC™ Resin
Availability
• Latin America
• North America
Uses
• Construction Applications
• Electrical/Electronic
Applications
• Lighting Applications
• Military/Defense Applications
• Optical Applications
• Water Management
Also Available In
• Asia Pacific
Physical
Nominal Value Unit
Test Method
Density / Specific Gravity
1.03 g/cm³
ASTM D792
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
4.0 cm³/10min
ISO 1133
Molding Shrinkage – Flow (3.20 mm)
0.70 to 0.90 %
Internal Method
Mechanical
Nominal Value Unit
Test Method
Tensile Modulus 3
1680 MPa
ASTM D638
Tensile Strength 4
ASTM D638
Yield
35.0 MPa
Break
28.0 MPa
Tensile Elongation 4
ASTM D638
Yield
3.5 %
Break
110 %
Flexural Modulus 5 (50.0 mm Span)
1900 MPa
ASTM D790
Flexural Strength 5 (Yield, 50.0 mm Span)
57.0 MPa
ASTM D790
Impact
Nominal Value Unit
Test Method
Notched Izod Impact
ASTM D256
-30°C
320 J/m
23°C
460 J/m
Instrumented Dart Impact
ASTM D3763
23°C, Total Energy
39.0 J
Thermal
Nominal Value Unit
Test Method
Deflection Temperature Under Load
ASTM D648
0.45 MPa, Unannealed, 3.20 mm
91.0 °C
1.8 MPa, Unannealed, 3.20 mm
77.0 °C
Vicat Softening Temperature
95.0 °C
ASTM D1525 6
CLTE
ASTM E831
Flow : -40 to 40°C
1.0E-4 cm/cm/°C
Transverse : -40 to 40°C
1.2E-4 cm/cm/°C
RTI Elec
60.0 °C
UL 746B
RTI Imp
60.0 °C
UL 746B
RTI Str
60.0 °C
UL 746B
Flammability
Nominal Value Unit
Test Method
Flame Rating (1.5 mm)
HB
UL 94
Fill Analysis
Nominal Value Unit
Test Method
Melt Viscosity (240°C, 100 sec^-1)
1520 Pa·s
ASTM D3835
1 of 3
Form No. TDS-58319-en
UL LLC ©2024. All rights reserved.
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Document Created: Tuesday, January 9, 2024
Added to Prospector: June 2002
Last Updated: 9/29/2023
CYCOLAC™ Resin EX39 – Americas
Acrylonitrile Butadiene Styrene
SABIC
www.ulprospector.com
Extrusion Notes
Sheet Extrusion Parameters
• Drying Temperature: 90 to 95°C
• Drying Time: 2 to 4 hr
• Maximum Moisture Content: 0%
• Barrel – Zone 1 Temperature: 195 to 210°C
• Barrel – Zone 2 Temperature: 200 to 220°C
• Barrel – Zone 3 Temperature: 205 to 230°C
• Barrel – Zone 4 Temperature: 210 to 235°C
• Adapter Temperature: 200 to 225°C
• Die Temperature: 210 to 240°C
• Melt Temperature: 210 to 240°C
Extrusion Blow Molding Parameters
• Drying Temperature: 80 to 90°C
• Drying Time: 5 to 4 hr
• Drying Time (Cumulative): 24 hr
• Minimum Moisture Content: 0.04%
• Maximum Moisture Content: 0.02 to 0.04%
• Melt Temperature (Parison): 210 to 225°C
• Barrel – Zone 1 Temperature: 190 to 220°C
• Barrel – Zone 2 Temperature: 190 to 220°C
• Barrel – Zone 3 Temperature: 190 to 220°C
• Barrel – Zone 4 Temperature: 190 to 220°C
• Adapter – Zone 5 Temperature: 195 to 220°C
• Head – Zone 6 – Top Temperature: 195 to 220°C
• Head – Zone 7 – Bottom Temperature: 195 to 220°C
• Screw Speed: 20 to 60 rpm
• Extruder Feed Zone Temperature: 60 to 80°C
• Mold Temperature: 40 to 90°C
• Die Temperature: 195 to 220°C
Notes
1 A UL Yellow Card contains UL-verified flammability and electrical characteristics. UL Prospector continually works to link Yellow Cards to
individual plastic materials in Prospector, however this list may not include all of the appropriate links. It is important that you verify the association
between these Yellow Cards and the plastic material found in Prospector. For a complete listing of Yellow Cards, visit the UL Yellow Card Search.
2 Typical properties: these are not to be construed as specifications.
3 5.0 mm/min
4 Type I, 5.0 mm/min
5 1.3 mm/min
6 Rate A (50°C/h), Loading 2 (50 N)
2 of 3
Form No. TDS-58319-en
UL LLC ©2024. All rights reserved.
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Document Created: Tuesday, January 9, 2024
Added to Prospector: June 2002
Last Updated: 9/29/2023
CYCOLAC™ Resin EX39 – Americas
Acrylonitrile Butadiene Styrene
SABIC
www.ulprospector.com
Where to Buy
Supplier
SABIC
Web: http://www.sabic.com/
Distributor
Bamberger Polymers, Inc.
Bamberger Polymers is a global distribution company. Contact Bamberger Polymers for availability of individual products by country.
Telephone: 516-622-3600
Web: http://www.bambergerpolymers.com/
Availability: Canada, Mexico, United States
Nexeo Plastics
Nexeo Plastics is leading global resin distributor with the technical resources you need to overcome material challenges. Visit us on the web at
www.nexeoplastics.com.
Telephone: 833-446-3936
Web: https://www.nexeoplastics.com/
Availability: North America
3 of 3
Form No. TDS-58319-en
UL LLC ©2024. All rights reserved.
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Document Created: Tuesday, January 9, 2024
Added to Prospector: June 2002
Last Updated: 9/29/2023